4: Configuration Using Web Manager

Figure 4-51. System

To configure the XPort AR’s system settings:

1.Click System from the navigation menu. The System window opens.

2.Configure the XPort AR’s system using the following fields:

Reboot Device

Click Reboot to reboot the XPort AR. The system refreshes

 

and redirects the browser to the XPort AR’s home page.

 

 

Restore Factory Defaults

Click Factory Defaults to restore the XPort AR to the original

 

factory settings. All configurations will be lost. The XPort AR

 

automatically reboots upon setting back to the defaults.

Upload New Firmware

Click Browse to locate the firmware file location. Click

 

Upload to install the firmware on the XPort AR. The device

 

automatically reboots upon the installation of new firmware.

 

 

Name

Enter a new Short Name and a Long Name (if necessary).

 

The Short Name is a maximum of 8 characters. Changes

 

take place upon the next reboot.

 

 

XPort AR User Guide

65

Page 65
Image 65
Lantronix To configure the XPort AR’s system settings, Reboot Device, Restore Factory Defaults, Upload New Firmware