Lantronix XPort AR No ip default-gateway, Show ip address filter, Speed 10 full, Speed auto

5: Configuration Using Telnet or Serial Port

No ip default-gateway

Remove the default gateway.

Show

Show interface settings.

Show history

Display previously-entered commands.

Show ip address filter

Display the IP filter table.

Speed 10

Set the Ethernet link to 10 Mbps (duplex is unchanged).

Speed 10 full

Set the Ethernet link to 10M bps (full-duplex).

Speed 10 half

Set the Ethernet link to 10 Mbps (half-duplex).

Speed 100

Set the Ethernet link to 100 Mbps (duplex is unchanged).

Speed 100 full

Set the Ethernet link to 100 Mbps (full-duplex).

Speed 100 half

Set the Ethernet link to 100 Mbps (half-duplex).

Speed auto

Set the Ethernet link to auto-negotiation.

Write

Store and apply current configuration into permanent memory.

XPort AR User Guide 90