Manuals / Compatible Systems / Computer Equipment / Server

Compatible Systems Enterprise-8 manual Shipping Defaults, Default Password, Ethernet Interfaces

Models: Enterprise-8 A00-1869

1 44

Download 44 pages 1.69 Kb

Page 35

Image 35

Chapter 7 - Shipping Defaults

Default Password

•letmein

Ethernet Interfaces

IP Defaults

•Ethernet 0:0 is on

•Address: 198.41.12.1

•Subnet mask: 255.255.255.0

•Broadcast address: 198.41.12.255

•Mode: Routed

•All other Ethernet interfaces are off

IPX Defaults

•Ethernet 0:0 is on

•Mode: Routed

•802.3 on, autoseeding

•802.2 on, autoseeding

•Type II off

•802.2 SNAP off

•All other Ethernet interfaces are off

AppleTalk Defaults

•Ethernet 0:0 is on

•Mode: Routed

•Phase II on, autoseeding

•All other Ethernet interfaces are off

Page 35

Image 35

Compatible Systems Enterprise-8 manual Shipping Defaults, Default Password, Ethernet Interfaces, IP Defaults, IPX Defaults

Contents

Boulder, Colorado IntraPort Enterprise-8 VPN Access Server Installation GuideCompatible Systems Corporation 4730 Walnut Street Suite Part number A00-1869 IntraPort Enterprise-8 VPN Access Server Installation Guide, VersionCopyright 1999, Compatible Systems Corporation Introduction to the IntraPort Enterprise-8 Chapter 3 - Network InstallationChapter 4 - CompatiView Software Installation Chapter 5 - Command Line ManagementAppendix A - Connector and Cable Pin Outs Chapter 6 - Basic Configuration GuideChapter 7 - Shipping Defaults Chapter 8 - LED Patterns and Test Switch SettingsTable of Contents Appendix E - When the “Over Temp” Light Comes OnAppendix D - Adding or Replacing RIOP Cards Appendix F - Terms and ConditionsFigure 1. Location of Voltage Switch on the Power Supply A Note About Remote Client Connections IntraPort Enterprise-8 Installation OverviewIntroduction to the IntraPort Enterprise-8 Chapter 5 - Command Line Preparation IntraPort Enterprise-8 Manual OverviewChapter 3 - Network Installation Chapter 4 - CompatiView Software InstallationPlease Read the Manuals Chapter 1 - Getting StartedA Few Notes Warranty and ServiceSupplied with the IntraPort Enterprise-8 What You Will Need to Get StartedAdditional Items Needed for Installation Chapter 2 - Mounting Instructions Placement ConsiderationsSafety Guidelines Figure 1. Location of Voltage Switch on the Power Supply Changing the Power Supply Voltage SettingsParts and Tools Figure 2.1. Installing Mounting Ears for a Telco Rack Installing Mounting Ears and HandlesFigure 3. Rack-Mount Brackets Rack-Mount BracketsFigure 4. Fastening the Right Bracket to the Rack Right Bracket InstallationFigure 5. Fastening the Left Bracket to the Rack Left Bracket InstallationFigure 6.1. Securing the Shelf Securing the ShelfFigure 6. Lowering the Shelf Figure 7.1. Moving the Unit into a Telco Rack Moving the Unit into the RackFigure 7. Moving the Unit into a Standard Equipment Rack Figure 8.1. Placing the Unit in a Telco Rack Placing the Unit in an Equipment RackFigure 8. Placing the Unit in a Standard Equipment Rack Figure 9. Securing the Unit to the Rack Securing the Unit to the RackPhysical Connection Requirements Chapter 3 - Network InstallationFigure 11. Detail of RIOP Cards Connecting the Server to the EthernetPower Alarm Information Connecting a Management ConsolePowering Up the Server System Requirements Chapter 4 - CompatiView Software InstallationInstallation and Operation CompatiView for WindowsTransport Protocols and CompatiView Temporarily Reconfiguring a Host for Command Line Management Chapter 5 - Command Line ManagementOut-of-Band Command Line Management Setting Up Telnet Operation IP Settings for Setups in Parallel with a Firewall Chapter 6 - Basic Configuration GuideEthernet Interface Configuration IP ProtocolIP Ethernet 60 section IP Settings for Setups Behind a FirewallRequired for LAN-to-LAN Tunnel Configurations Configuring the Server for LAN-to-LAN TunnelsIPX Protocol AppleTalk ProtocolVPN User Database Configuring the Server for IP and IPX Client TunnelsRequired for Client Tunnel Configurations Suggested for Client Tunnel ConfigurationsRADIUS Server User Authentication Settings Setting up RADIUS AuthenticationSetting the IntraPort Enterprise-8 for a RADIUS Server ACE/Server Settings Setting up SecurID AuthenticationSetting the IntraPort Enterprise-8 for an ACE/Server CV Use the Save to/Device option from the File menu Saving a Configuration File to Flash ROMTB Use the save command IPX Defaults Chapter 7 - Shipping DefaultsDefault Password IP DefaultsLoad % Indicators Chapter 8 - LED Patterns and Test Switch SettingsGeneral Indicators Ethernet Traffic IndicatorsIntraPort Enterprise-8 Switch Settings Pin Outs for DB-25 Male to DB-25 Female Console Cable Appendix A - Connector and Cable Pin OutsAppendix B - Downloading Software From Compatible Systems Appendix B - Downloading Software From Compatible SystemsAppendix C - Security Dynamics ACE/Server Information Appendix C - Security Dynamics ACE/Server InformationAppendix D - Adding or Replacing RIOP Cards Appendix D - Adding or Replacing RIOP CardsAppendix E - When the “Over Temp” Light Comes On Replacing or Cleaning the Intraport Enterprise-8 Air FilterAppendix E - When the “Over Temp” Light Comes On Appendix F - Terms and Conditions Appendix F - Terms and Conditions3. Payment Terms. Payment shall be made prior to shipment or upon delivery, unless otherwise agreed to in writing. Payment shall not constitute acceptance of the goods