Chapter 3 - Network Installation

15

Chapter 3 - Network Installation

This section of the manual describes how to connect the IntraPort Enterprise-8 VPN Access Server to your Ethernet networks. In summary, the steps for installation are:

1.After mounting the server or placing on a desktop, make sure it is not connected to any power source.

2.Connect the server to the Ethernet network(s).

3.Connect a management console to the server (optional).

4.Plug in the power cables and power up the server.

Figure 10. IntraPort Enterprise-8 VPN Access Server

Physical Connection Requirements

To connect each one of the IntraPort Enterprise-8’s Ethernet interfaces to twisted-pair Ethernet cabling, you will need one unshielded twisted-pair station cable that is connected to a 10BaseT-compatible twisted-pair hub (for a transmit speed of 10 Mbps) or a 100Mbps Fast Ethernet hub (for a transmit speed of 100 Mbps).

ϖNote: Ethernet cables and cable connectors are not supplied with the IntraPort Enter- prise-8. Category 5 cabling is required for 100 BaseT operation. Please contact your reseller or your Compatible Systems representative for information on obtaining the correct Ethernet cabling supplies.

Page 21
Image 21
Compatible Systems Enterprise-8, A00-1869 manual Network Installation, Physical Connection Requirements