Compatible Systems A00-1869, Enterprise-8 manual Moving the Unit into the Rack

Chapter 2 - Mounting Instructions 12

Moving the Unit into the Rack

Never attempt to move the server using the RIOP card handles or the filter cover opening. They will not support the weight of the device. Use the built-in side handles and either the large mounting handles, if you have installed them, or the very bottom of the chassis to move it.

Figure 7. Moving the Unit into a Standard Equipment Rack

1.Two people are needed to move the unit into the rack. Do not attempt to move the unit by yourself. Holding the unit by the front and side handles as shown in Figure 7, care- fully lift the unit and place it into the brackets.

Figure 7.1. Moving the Unit into a Telco Rack

1.Two people are needed to move the unit into the rack. Do not attempt to move the unit by yourself. Holding the unit from the bottom and by the side handles as shown in Figure 7.1, carefully lift the unit and place it into the brackets.