Securing the Unit to the Rack | Compatible Systems A00-1869 manual

Chapter 2 - Mounting Instructions

14

Securing the Unit to the Rack

Figure 9. Securing the Unit to the Rack

1.Using your own screws or clips, secure the mounting ears to the rack as shown in Figure 9, using two screws at the top of each mounting ear and two screws at the bottom of each mounting ear.

Image 20

Compatible Systems A00-1869, Enterprise-8 manual Securing the Unit to the Rack

Contents

IntraPort Enterprise-8 VPN Access Server Installation Guide Page Network Installation CompatiView Software InstallationCommand Line Management Introduction to the IntraPort Enterprise-8 Basic Configuration Guide Shipping DefaultsLED Patterns and Test Switch Settings Appendix a Connector and Cable Pin Outs Appendix F Terms and Conditions Iii Location of Voltage Switch on the Power Supply IntraPort Enterprise-8 Installation Overview Introduction to the IntraPort Enterprise-8 IntraPort Enterprise-8 Manual Overview Warranty and Service Getting StartedFew Notes Please Read the Manuals Supplied with the IntraPort Enterprise-8 Additional Items Needed for InstallationWhat You Will Need to Get Started Mounting Instructions Placement ConsiderationsSafety Guidelines Changing the Power Supply Voltage Settings Parts and Tools Installing Mounting Ears and Handles Installing Mounting Ears for a Telco Rack Rack-Mount Brackets Rack-Mount Brackets Right Bracket Installation Fastening the Right Bracket to the Rack Left Bracket Installation Fastening the Left Bracket to the Rack Securing the Shelf Lowering the Shelf Moving the Unit into the Rack Moving the Unit into a Standard Equipment Rack Placing the Unit in an Equipment Rack Placing the Unit in a Standard Equipment Rack Securing the Unit to the Rack Securing the Unit to the Rack Network Installation Physical Connection Requirements Connecting the Server to the Ethernet Detail of Riop Cards Power Alarm Information Connecting a Management ConsolePowering Up the Server CompatiView Software Installation Installation and OperationCompatiView for Windows System Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line Management Setting Up Telnet Operation Basic Configuration Guide Ethernet Interface ConfigurationIP Settings for Setups in Parallel with a Firewall IP Protocol IP Settings for Setups Behind a Firewall AppleTalk Protocol Configuring the Server for LAN-to-LAN TunnelsIPX Protocol Configuring the Server for IP and IPX Client Tunnels Required for Client Tunnel ConfigurationsSuggested for Client Tunnel Configurations VPN User Database Radius Server User Authentication Settings Setting up Radius AuthenticationSetting the IntraPort Enterprise-8 for a Radius Server ACE/Server Settings Setting up SecurID AuthenticationSetting the IntraPort Enterprise-8 for an ACE/Server Saving a Configuration File to Flash ROM Ethernet Interfaces Shipping DefaultsDefault Password IntraPort Enterprise-8 LED Patterns IntraPort Enterprise-8 Switch Settings Appendix a Connector and Cable Pin Outs Pin Outs for DB-25 Male to DB-25 Female Console Cable Appendix B Downloading Software From Compatible Systems Appendix C Security Dynamics ACE/Server Information Appendix D Adding or Replacing Riop Cards Removing and Replacing an Riop Card or Cover Plate Appendix E When the Over Temp Light Comes On Replacing or Cleaning the Intraport Enterprise-8 Air Filter Appendix F Terms and Conditions Appendix F Terms and Conditions