| Table of Contents |
|
Figure 1. Location of Voltage Switch on the Power Supply | 6 | |
Figure 2. Installing Mounting Ears and Handles for a Standard Equipment Rack | 7 | |
Figure 2.1. Installing Mounting Ears for a Telco Rack | 7 | |
Figure 3. | 8 | |
Figure 4. Fastening the Right Bracket to the Rack | 9 | |
Figure 5. | Fastening the Left Bracket to the Rack | 10 |
Figure 6. | Lowering the Shelf | 11 |
Figure 6.1. Securing the Shelf | 11 | |
Figure 7. | Moving the Unit into a Standard Equipment Rack | 12 |
Figure 7.1. Moving the Unit into a Telco Rack | 12 | |
Figure 8. | Placing the Unit in a Standard Equipment Rack | 13 |
Figure 8.1. Placing the Unit in a Telco Rack | 13 | |
Figure 9. Securing the Unit to the Rack | 14 | |
Figure 10. IntraPort | 15 | |
Figure 11. Detail of RIOP Cards | 16 | |
Figure 12. Detail of Power Units | 17 | |
Figure 13. Removing and Replacing an RIOP Card or Cover Plate | 35 | |
Figure 14. Removing the Filter Cover Plate | 36 |
iv