4: Configuration Using Web Manager
Figure 4-11. Line 1 Configuration
2. Enter or modify the following fields:
Status | Displays the whether the current line is enabled. To change |
| the status, select Enabled or Disabled from the |
| menu. |
Baud Rate | Select the XPort AR’s baud rate from the |
| The default is 9600. |
Parity | Select the XPort AR’s parity from the |
| default is None. |
Data Bits | Select the number of data bits from the |
| default is 8. |
Stop Bits | Select the number of stop bits from the |
| default is 1. |
Flow Control | Select the XPort AR’s flow control from the |
| The default is None. |
3. Click Submit. Changes are applied immediately to the XPort AR.
Line 1 Command Mode
Setting Command Mode enables the CLI on the serial line.
To configure Line 1’s command mode:
1.Click Line 1 Æ Command Mode from the navigation menu. The Line 1 Command Mode window displays.
XPort AR User Guide | 27 |
