5: Configuration Using Telnet or Serial Port

Tftp put binary <source file> <destination file> <host>

Send a binary file using TFTP.

Tftp put binary <source file> <destination file> <host> <port>

Send a binary file using TFTP.

Touch <string>

Create a file on the filesystem. Enter the filename to be created.

Line Menu

The following sections describe the configurable parameters within the Line 1, Line 2, and Line 3 configuration menus. These configure serial ports 1, 2, and 3.

Auto show statistics

Continuously display line statistics.

Clear line counters

Set to zero the serial counters.

Clrscrn

Clears the screen.

Command mode always

Set command mode to always enabled.

Command mode cp

Set Command Mode to use CP settings.

Command mode cp <cp group> <value>

Specify a CP group and trigger value.

Command mode echo serial string

Enable echoing of serial data at boot-up.

XPort AR User Guide

99

Page 99
Image 99
Lantronix XPort AR manual Line Menu