Cisco Systems 1105 manual Set Up AAA Servers, Contact command, Location command, Groups

Chapter 6 Performing Administrative Tasks

Using Discovery and Managing Devices

Table 6-5 Set Up Procedures for Routers and Switches (continued)

Task	Procedure	Notes
3. (Optional) Set	On IOS-based devices, enter configuration mode	These variables make the
the system name,	and use the following commands.	device more manageable.
contact, and	• To set the system name, use the hostname name	The location variable
location		enables proper grouping of
	command.
variables.		devices into the
	• To set the system contact, use the snmp contact
		system-defined Location
	contact command.	group. For more information
	• To set the location, use the snmp location	about groups, see Managing
	location command.	Groups, page 6-37.
	On Hybrid OS-based Catalyst switches, enter enable	The system name, system
		contact, and location will
	mode and use the following commands:
		appear in the device detail
	• To set the system name, use the set system
		displays.
	name name command.
	• To set the system contact, use the set system
	contact contact command.
	• To set the location, use the set system location
	location command.

Set Up AAA Servers

The WLSE can monitor the performance of AAA (Authentication, Authorization, and Accounting) services provided by CiscoSecure ACS Server. To enable monitoring, you must:

•Configure CiscoSecure ACS server to recognize the WLSE as a client. Follow the procedure in this section on each server.

•Configure the WLSE to add information about the LEAP, RADIUS, and EAP-MD5 servers. For more information, see Adding, Modifying and Deleting AAA Servers, page 6-33.

Procedure

Step 1 Log into CiscoSecure ACS Server on a PC that will provide authentication services to the wireless network.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-16	78-14947-01