Cisco Systems 1105 manual Field Description

Chapter 3 Configuring Devices

Using the Templates

Table 3-18 11b Radio Hardware Settings (continued)

Field	Description
Enable “World Mode”	From the list, select one of the following:
multi-domain operation?	• yes—Allows the access point to add
	channel carrier set information to its
	beacon.
	Client devices with world-mode enabled
	receive the carrier set information and
	adjust their settings automatically.
	• no—Does not allow the access point to
	add channel carrier set information to its
	beacon.
Data Rates (Mb/sec)
1.0	From the list, select one of the following for
	each of the four rates in megabits per second:
2.0
	• basic—Allows transmission at this rate
5.5
	for all packets, both unicast and
11.0
	multicast. At least one data rate must be
	set to basic.
	• yes—Allows transmission at this rate for
	unicast packets only.
	• no—Does not allow transmission at this
	rate.
Transmit Power	From the list, select one of the following
	milliwatt settings: 1, 5, 20, 30, 50, 100.
	To reduce interference or to conserve power,
	select a lower power setting.
	Click see details to see which versions this
	setting is valid for.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-62	78-14947-01