Chapter3 Configuring Devices
Using the Templates
3-128
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Step 3 Select one of the following in the left pane:
•Preview to see your changes before you apply them. (See Previewing the
Template, page3 -131.)
•Finish to save the template. (See Finishing the Template, page 3-132.)
•Another template category to configure more options. (See Tem plate
Categories, page3-2.)
Maximum Number of Bytes
Stored per Alert Packet
(0- 2312)
Enter the maximum number of bytes the
access point stores for each Station Alert
packet when packet tracing is enabled.
If you use 0, the access point does not store
bytes for Station Alert packets; it only logs
the event.
Note Changing this setting may cause the
access point to reboot.
Maximum Memory Reserved for
Detailed Event Trace Buffer
(bytes) (0-8388608)
Enter the number of bytes reserved for the
Detailed Event Trace Buffer.
The Detailed Event Trace Buffer is a tool for
tracing the contents of packets between
specified stations on your network.
Note Changing this setting may cause the
access point to reboot.
Table3-41 Event Handling Settings (continued)
Field Description