Chapter3 Configuring Devices
Using the Templates
3-58
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Step 3 Select one of the following in the left pane:
•Preview to see your changes before you apply them. (See Previewing the
Template, page3 -131.)
•Finish to save the template. (See Finishing the Template, page 3-132.)
•Another template category to configure more options. (See Tem plate
Categories, page3-2.)
Table3-16 11b Radio Identification Settings
Field Description
Primary Port? From the list, select one of the following:
Note If the primary port was set using
Ethernet > Identification, the
selected value is displayed.
•Ethernet—Sets the Ethernet port for all
access points other than AP1200’s as the
primary port.
•Ethernet AP 1200—Sets the Ethernet
port for AP1200 access points as the
primary port.
•Radio 11b—Sets the 11b radio port as
the primary port.
•Radio 11a—Sets the 11a radio port as
the primary port.
Adopt Primary Port Identity? From the list, select one of the following:
•yes—This adopts the primary port
settings (MAC and IP addresses) for the
Ethernet port.
•no—This uses different MAC and IP
addresses for the Ethernet port.