Cisco Systems 1105 manual Finish to save the template. See Finishing the Template

Chapter 3 Configuring Devices

Using the Templates

Table 3-24 11a Radio Advanced Settings (continued)

Field

Description

Default Unicast Address Filter

Open	From the list, select one of the following:
Shared	• Allowed—The access point forwards all
	traffic except packets sent to the MAC
Network-EAP
	addresses set as disallowed with the
	Address Filters.
	• Disallowed—The access point discards
	all traffic except packets sent to the MAC
	addresses set as allowed with the
	Address Filters or on your authentication
	server.
	Select Disallowed for each
	authentication type that also uses
	MAC-based authentication.
Specified Access Point 1	If this access point is a repeater, enter the
	MAC address of one or more root-unit access
Specified Access Point 2
	points with which you want this access point
Specified Access Point 3
	to associate.
Specified Access Point 4	With MAC addresses in these fields, the
	repeater access point always tries to associate
	with the specified access points instead of
	with other less-efficient access points.

Step 4 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-87