Cisco Systems 1105 manual 24 11a Radio Advanced Settings

Chapter 3 Configuring Devices

Using the Templates

Step 3 Complete the following:

Note Clicking Clear removes all the current entries in the window and any entries you have made in other Template windows up until that point.

Table 3-24 11a Radio Advanced Settings

		Field	Description
		Status	From the list, select one of the following:
			• up—Enables the Radio port for normal
			operation.
			• down—Disables the device’s Radio port.
		Packet Forwarding	From the list, select one of the following:
			• enabled—Allows normal operation.
			• disabled—Prevents data from moving
			between the Ethernet and the radio,
			which is useful in troubleshooting.
		Default Multicast Address Filter	From the list, select one of the following:
			• Allowed—The access point forwards all
			traffic except packets sent to the MAC
			addresses set as disallowed under
			Association > Address Filters.
			• Disallowed—The access point discards
			all traffic except packets sent to the MAC
			addresses set as allowed under
			Association > Address Filters.
		Maximum Multicast	Use this setting to control the number of
		Packets/Second	multicast packets that can pass through the
			Ethernet port each second.
			If you enter 0, the access point passes an
			unlimited number of multicast packets.
			If you enter a number other than 0, the device
			passes only that number of multicast packets
			per second.
	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-82			78-14947-01