3-93
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter3 Configuring Devices Using the Templates
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Step 3 Using this option you can:
•Add Users—See Adding Users, page 3-93.
•Delete Users—See Deleting Users, page 3-94.
Adding Users
Procedure
Step 1 To add a new user, enter the following:
Table3-27 Local Admin Access Settings
Field Description
Local Admin Authentication Select Enable to enable local admin
authentication, or Disable to disable it.
Allow read-only browsing
without login Select Yes to allow it, or No to disallow it.
Field Description
User ID Enter an identification number for the user.
Tip If you want to set the same user name on all
access points and do not know which user ID’s
may already be in use, enter a very high value
(2000).
User name Enter the name for the user.
User password Enter a pa ssword f or the us er.
Capabilities Select the capabilities you want to allow the user.