Cisco Systems 1105 manual Continue to Step, Enable Poll Interval Settings Overloaded

Chapter 2 Fault Monitoring

Managing Profiles

•Ethernet Port Utilization—Go to Step 4.

•Ethernet Port Packet Errors—Go to Step 4.

•Associated Clients—Go toStep 4.

•SSID Mismatch Rate—Go toStep 4.

•Association Rate—Go to Step 4.

Step 2 Complete the following:

	Field	Description
	Enable	Select to enable a threshold for this component.
	Poll Interval	From the list, select the polling interval.
	Settings
	Down	From the list, select the severity level and the
		number of polling cycles before the status is
		Down.
	Up	From the list, select the number of polling
		cycles before the fault is cleared and the status
		is Up.
Step 3	Continue to Step 5.
Step 4	Complete the following:

Field

Enable

Poll Interval

Settings

Overloaded

Description

Select to enable a threshold for this component.

From the list, select the polling interval.

From the list, select the severity level, the percentage, and the number of polling cycles before the status is Overloaded.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
2-16	78-14947-01