Chapter 3 Configuring Devices

Using the Templates

Table 3-7 Adding a New VLAN Settings (continued)

Field

Description

 

 

Enhanced MIC

From the list, select one of the following:

verify WEP

None—Use this setting if you do not want Message

 

 

Integrity Check (MIC) enabled.

 

MMH—Use this setting if you want MIC enabled to

 

protect WEP keys.

 

Note When you enable MIC, only MIC-capable client

 

devices can communicate with the access point.

 

 

Temp Key

From the list, select one of the following:

Integrity Protocol

None—Use this setting if you do not want to enable

 

 

the temporal key integrity protocol (TKIP, or WEP

 

key hashing.)

 

Cisco—Use this setting to enable TKIP.

 

Note When TKIP is enabled, all WEP-enabled client

 

devices associated to the access point must

 

support WEP key hashing, or they will not be

 

able to communicate with the access point.

 

 

WEP Key Rotation

Use this setting to enable or disable broadcast key

Interval

rotation.

 

To enable it, enter the rotation interval in seconds.

 

If you enter 900, for example, the access point sends

 

a new broadcast WEP key to all associated client

 

devices every 15 minutes.

 

Note When you enable broadcast key rotation, only

 

wireless client devices using LEAP or EAP-TLS

 

authentication can use the access point. Client

 

devices using static WEP (with open, shared key,

 

or EAP-MD5) cannot use the access point when

 

you enable broadcast key rotation.

 

To disable it, enter 0 (zero).

 

 

 

User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine

3-34

78-14947-01

Page 88
Image 88
Cisco Systems 1105 manual Field Description