Cisco Systems 1105 manual Procedure, For routers

Chapter 5 Using Reports

Using the Device Center

Procedure

Step 1 Select Reports > Device Center. The Device Center appears above the device selector in the left pane.

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3 Select the device from the folder in the left pane, and the right pane displays the Summary Report for the device.

Step 4 Click on the buttons for different report types:

•For access points and bridges:

–Summary report—SeeDisplaying an AP Summary Report, page 5-24

–Detailed report—SeeDisplaying a Detailed Report, page 5-26

–Fault Status—SeeViewing the Fault Summary Report, page 5-3

–Device History—SeeViewing Device History, page 5-4

–Config History—SeeViewing Config History, page 5-4

–Firmware History—SeeViewing Firmware History, page 5-5

–AP Web Page—Opens up a browser window to the AP Summary Status.

•For switches:

–Summary report —SeeDisplaying a Switch Summary Report, page 5-45

–Fault Status—SeeViewing the Fault Summary Report, page 5-3

–Device History—SeeViewing Device History, page 5-4

•For routers:

–Summary Report—SeeDisplaying a Router Summary Report, page 5-47

–Fault Status—SeeViewing the Fault Summary Report, page 5-3

–Device History—SeeViewing Device History, page 5-4

•For servers—SeeDisplaying a Server Response Time Graph, page 5-65.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-2	78-14947-01