Cisco Systems 1105 Defining Advanced Associations, Deleting an Existing Service Set Procedure

Chapter 3 Configuring Devices

Using the Templates

Deleting an Existing Service Set

Procedure

Step 1 Enter the Service Set number in the Service Set ID text box, then click Add to add it to the Service Sets to Delete list.

Step 2 To delete an identification number from the list, select it, then click Delete.

Step 3 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

Defining Advanced Associations

Use this option to control the total number of devices an access point can list in the Association Table and the amount of time the access point continues to track each device class when a device is inactive.

Procedure

Step 1 Select Association > Advanced. The Association: Advanced dialog box appears.

Step 2 To define advanced associations, enter the following:

Note Clicking Clear removes all the current entries in the window and any entries you have made in other Template windows up until that point.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-42	78-14947-01