Contrast screen appears showing | Nortel Networks NN10300-020

.

53

Adjusting the contrast and brightness of the display

Follow this procedure to adjust the contrast level of the display.

Step Action

1Open the Tools menu.

2Select and open Display

The Contrast screen appears showing:

•Contrast, and a set of Down and Up keys

•Brightness, and a set of Down and Up keys

•Sleep in xxx (where xxx is a time in minutes or hours), and a set of Down and Up soft keys

3Perform one of these actions:

•To increase the contrast, press Up beside the Contrast label.

•To decrease the contrast, press Down beside the Contrast label.

The level decreases or increases each time you press the key.

4Perform one of these actions:

•To increase the display brightness, press Up beside the Brightness label.

•To decrease the display brightness, press Down beside the Contrast label.

The level decreases or increases each time you press the key.

5Stop pressing the key when you find the contrast or brightness you like.

6Press Exit.

Carrier VoIP

Nortel IP Phone 2007 User Guide (CICM)

NN10300-020 02.03 Standard

7 March 2008

Copyright © 2007, 2008 Nortel Networks

Image 53

Nortel Networks NN10300-020 manual Adjusting the contrast and brightness of the display, Contrast screen appears showing

Contents

Nortel IP Phone 2007 User Guide Cicm Page Contents Answering calls Selecting the language Using the Time menu Using the Outbox Following feature changes were made FeaturesNew in this release Other changes New in this release IP Phone 2007 components Overview IP Phone terminal description Application area Upgradeable firmware Wideband audio supportTouch panel description Touch panel application area Touch panel application area cont’d Component Description Tools area Stylus CalibrationSoftkey functionality Touch screen will need occasional cleaning Terminal indicatorsTouch screen maintenance Overview Main menu IP Phone 2007 menu systemsLogoff Audio Reset FeatureAssign Label Upgrade DiagnosticsUser History Local diagnostics Network configurationTouch panel setup Tools menu Tftp upgrade How to use the navigation keysContrast and brightness USB devices IP Phone 2007 menu systems Risk of equipment damage Connecting the IP Phone to the LAN IP Phone connectors Procedure job aid Press Ok Password screen appearsLogging on You are logged on and the Menu screen appears You are logged off from the network Logging offConfirmation screen appears Logging off Calibrating the touch panel Maintaining the touch panelTools menu opens System prompts you to touch the center of the red dot Follow this procedure to clean the touch panel Cleaning the touch panel Making a call using handsfree dialing Making a call using off-hook dialingMaking calls Primary extension is active and you hear a dial tone Handsfree feature is active Making a call using predialEditing a predialed number Line is selected and you hear a dial tone Use the dialpad to enter the new number Making calls Answering calls Follow this procedure to answer a callAnswering a call Answering a second call Call is answered Call is ended Ending a call Ending a call While on an active call Using call holdTransferring a call To put the call on hold, press the Hold key Dial the number of the person you want to add to the call Using conference callCall is transferred During a call, press the Mute key Using the mute featureRed light is turned on to indicate the feature is enabled While on an active call To turn off call forward, touch the forward key Using call forward Using call forward Navigating the menu system Follow this procedure to navigate the main menuNavigating the main menu Selected menu opens Select and open Default Volumes Navigating the Feature menuFollow this procedure to open the Feature menu Navigating the Audio menu Navigating the User menu Navigating the Time menu See Changing your password Viewing and editing your audio profile Using the Audio menu List of available profiles appears Viewing and editing the default volumesCheck mark appears beside the selection New profile is saved and you return to the main menu Follow this procedure to view and edit the dialpad feedback Resetting a default volumeDefault Volumes menu opens Viewing and editing the dialpad feedback Selecting a ring tone Open the Tools menu Select and open Display Adjusting the contrast and brightness of the displayContrast screen appears showing Level decreases or increases each time you press the key Adjusting the contrast and brightness of the display Follow this procedure to open the Assign menu Using the Feature menuUsing the Assign menu Defining the key type Feature submenu appearsAssign menu opens Fundamentals, NN10044-111 Directory contact list opens Assigning a directory entry to a feature keyEnabling or disabling autoscroll AutoScroll screen appears Enabling or disabling the Inbox Using the Options menu Labeling a feature keyFollow this procedure to open the Options menu Enabling or disabling auto hide Selecting the default line key Default Features screen appears, showing a list of DN keys Resetting the feature key to the default settingsFrom the Options menu, select and open Default Feature Using the Feature menu Press Cancel Follow this procedure to select your language preferenceSelecting the language Terminal now displays text in the selected language Selecting the language Setting the time zone Using the Time menuEnabling Daylight Saving Time Time displayed changes to that of the selected zone Follow this procedure to disable Daylight Saving Time Setting the time formatDisabling Daylight Saving Time Select On Press Ok Check mark appears beside the format currently in use Setting the date formatTo enable a format, select it and press Ok Resetting the default time Viewing your login type Using the User menuFollow this procedure to view your user name Viewing your username If you have permission to edit this feature, press Ok Viewing, disabling, or enabling the auto login feature Changing your password Using the User menu Testing the local mode Testing the local mode Firmware is downloaded Performing a firmware upgradeSecond confirmation screen appears Performing a firmware upgrade Directory menu opens Using the directoryAdding or editing a directory entry You are asked to confirm the action Deleting an entry from the directoryEnter the number Press Ok Press Ok and then press Yes to confirm the action Making a call using the directoryDial screen appears Number is dialed Using the directory Using the Inbox Viewing Inbox call information Accessing the InboxStoring a number from the Inbox List of options appears Resetting the Inbox Using the Inbox to make a call From the History menu, select Reset Inbox Press Ok Follow this procedure to access and use the Outbox Using the OutboxAccessing the Outbox Storing a number from the Outbox Viewing Outbox call informationPress the Outbox key Select a number from the list Resetting the Outbox Using the Outbox to make a callFollow this procedure to make a call from within the Outbox Follow this procedure to delete the contents of the Outbox Using the Outbox Adjusting the sleep timer Time increases or decreases each time you press the key Press the button in the Icon column Using the Preferences toolOpen the Tools menu To return to the main display, press Exit again You return to the Preferences menu Procedure job aid Using the Preferences tool On-screen keyboard is displayed Using the on-screen keyboard to enter textPress the keyboard icon Using the on-screen keyboard to enter text Letter appears on the display Using the dialpad to enter text Procedure job aid Feature Access Code Access Code summary Access Code summary Page Nortel IP Phone 2007 User Guide Cicm