Installation

Positioning the Projector

This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to the figure and the table below for the screen size and the distance between the projector and the screen.

A : B = 9 : 1

 

25.3' (7.7m)

 

 

 

 

300”

(Inch Diagonal)

 

16.4' (5.0m)

 

 

 

12.5' (3.8m)

Max. Zoom

 

 

195”

 

8.2' (2.5m)

195”

 

 

 

3.3' (1.0m)

150”

Min. Zoom

A

 

127”

100”

 

 

 

 

 

97”

 

 

40”

64”

 

 

 

 

 

 

 

 

(Center)

 

 

 

B

Screen Size

 

40”

 

100”

150”

195”

300”

(W x H) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

813 x 610

 

2032 x 1524

3048 x 2286

3962 x 2972

6096 x 4572

4 : 3 aspect ratio

 

 

 

 

 

 

 

 

 

 

Zoom (min)

 

4.9' (1.5m)

 

12.8' (3.9m)

19.3' (5.9m)

25.3' (7.7m)

––-––

 

 

 

 

 

 

 

 

Zoom (max)

 

3.3' (1.0m)

 

8.2' (2.5m)

12.5' (3.8m)

16.4' (5.0m)

25.3' (7.7m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image.

The values shown are approximate and may vary from the actual size.

Adjustable Feet

Projection angle can be adjusted up to 11.8 degrees with the adjustable feet.

1Lift the front of the projector and pull the feet lock latches on both sides of the projector.

2Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt.

3To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches.

Keystone distortion of the projected image can be adjusted by menu operation. (p20, 38)

CAUTION

Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. See page 5.

Feet Lock Latches

Adjustable Feet

16

Page 16
Image 16
Eiki lc-sb15 owner manual Installation, Positioning the Projector, Adjustable Feet