Basic Operation
Turning On the Projector
1Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector.
26
2Connect the projector's AC power cord into an AC outlet. The POWER indicator flashes red in a moment and turns on red.
3Press the POWER
| the screen and the count down starts. | The preparation display disappears after 30 seconds. | ||||
4 | After the |
| Selected Input Source | |||
| appears on the screen. |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turning Off the Projector
1Press the POWER
2Press the POWER
3When the projector has cooled down enough to be turned on again, the POWER indicator lights red. Then you can disconnect the AC power cord.
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE COOLING FANS ARE RUNNING OR BEFORE POWER INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT IN SHORTENING LAMP LIFE.
The message disappears after 4 seconds.
NOTE
●The projector cannot be turned on during the cooling period with the POWER indicator flashing red. You can turn it on again after the POWER indicator lights red.
●When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (See page 39 for the On start function.)
●Do not use the projector for more than 24 hours continuously. Turn off the projector at least once in 24 hours and give it a rest. Continuous use may result in shortening the lamp lifetime.
●This projector monitors internal temperature and automatically controls the running speed of the cooling fans.
●If the WARNING indicator flashes or lights red, see “Warning Indicator” on page 41.
19
