Setting
Setting
1Press the MENU button and the
2Press the Point Down button to move the red frame pointer to the item that you want to set and then press the SELECT button. The Setting dialog box appears.
Language
The language used in the
Keystone
This function corrects distortion of a projected image. Select either Store or Reset with the Point Left/Right button, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point Up/Down/Left/Right button.
Store ···· stores the keystone adjustment even if the AC power cord is disconnected.
Reset ····resets the keystone adjustment when the AC power cord is disconnected.
Blue back
When this function is “On,” the projector produces a blue image while input signal is not detected.
Display
This function decides whether to display
Off ···· does not show
●
●“Power off?” message
●
●“No signal” message
●”Wait a moment!” message
Logo
This function decides what to be displayed when starting up.
User | ···· the image you captured |
Default | ···· the |
Off | ···· |
Capture
This function is used to capture the image being projected and use it for a
To capture the image, select [Yes]. To cancel the Capture function, select [No].
Before captureing an image, select Standard in the Image Select Menu to capture a proper image. (See page 29, 35.)
A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment.
Setting Menu (Language)
Set the red frame | Setting Menu icon |
pointer to the item |
|
and press the |
|
SELECT button. |
|
When pressing the SELECT button at Language, the Language Menu appears.
Capture
Select [Yes] to capture the projected image.
Select [Yes] to stop capturing.
38
