60Using the Feature menu
such as Call Forward and Make Set Busy, (which can only be activated while the user’s line is idle). Conversely, displaying either of these features against a key while the user is active in a call is not necessary.
Some features are configured so that they are never hidden, because they are relevant when the user’s line is both idle and active.
The features relevant states are configured by your administrator.
You cannot change the administrator settings for each feature, but you can enable Auto Hide (to show only the relevant features), or disable Auto Hide (to show all features all of the time, regardless of their relevance to the current state of the phone).
Follow this procedure to enable or disable the Auto Hide feature. When you complete this procedure, you must log out, and then log back in for the functionality to take effect.
Step Action
1From the main menu, open the Feature menu.
2From the Feature menu, select and open Options. The Options menu opens.
3From the Options menu, select and open Auto Hide. The Auto Hide screen appears.
4Perform one of these actions:
•To enable Auto Hide, select Enable.
•To disable Auto Hide, select Disable.
5Press Ok.
A check mark appears beside your selection. You return to the Options menu.
Selecting the default line key
Follow this procedure to select a feature key to be your default line key.
Step Action
1From the main menu, open the Feature menu.
2From the Feature menu, select and open Options. The Options menu opens.
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
7 March 2008
Copyright © 2007, 2008 Nortel Networks
