Fujitsu D1961 technical manual Notational conventions, Additional information

Page 11

Mainboard D1961

Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard.

Additional information

Information on the BIOS Setup and additional descriptions of the drivers are contained:

in the readme files on your hard disk

on the driver floppy disks included

on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".

The programme Acrobat Reader must be installed to be able to open the manuals. You will i find the programme on the CD-ROM directory: utls/acrobat.

For more details please read the according readme.txt files.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

indicates information which is important for your health or for preventing physical ! damage.

i

indicates additional information which is required to use the system properly.

Text which follows this symbol describes activities that must be performed in the order shown. This symbol indicates that you must press the Enter key.

└┘ This symbol indicates that you must enter a blank space (press the Space Bar) at this point. Text in this typeface indicates screen outputs.

Text in this bold typeface indicates the entries you make via the keyboard. Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters or terms.

A26361-D1961-Z120-1-7419, edition 2

English - 1

Image 11
Contents English AnswersSie haben Page A26361-D1961-Z120-1-7419 Ausgabe Januar January 2005 edition Mainboard D1961Technisches Handbuch Technical Manual Page 11 10 Übersicht/Overview Mainboard D1961Page Contents Page Additional information Notational conventionsInformation about boards Important notesSpecial onboard features List of featuresOnboard features External ports Internal portsSpecial features Prior to installation Brief instructions on installing mainboardDriver installation InstallationLED 1 green Interfaces and connectorsExternal ports LAN portAudio front panel Internal ports and connectorsOr 6-channel audio mode via analogue audio channels Hard disk connectionAnalogue 4-channel audio output Using external audio connectionsSelecting settings for 2, 4 or 6-channel audio mode Analogue 2-channel audio outputAudio Pin assignment of internal portsFront panel Fan 1 Audio front panelUSB dual channel Floppy interface ATA interface Additional power supply ATX12 Power supply BTXRecovering System Bios pinpair B Settings with switches and jumpersSetting via control-panel plug connector Skipping system and Bios Setup password pinpair aReplacing the processor Installing processor with heat sinkTechnical data Add-on modules / UpgradingReplacing the processor Mounting heat sink Upgrading main memory Installing a memory moduleRemoving a memory module Upgrading AGP screen controllersAdding PCI cards Monofunctional expansions cards PCI bus interrupts Selecting correct PCI slotAudio Modem Replacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateWhen should a Bios update be carried out? Bios Recovery Recovering System Bios When should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers Mainboard current requirement AnnexElectrical Properties Loadability for connections and fusesLED APM and Acpi system status, energy-saving modesMainboard Revision Mainboard Revision and Bios VersionBios version Bios update for installed CPU failed Error messagesError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary