Fujitsu D1961 Upgrading AGP screen controllers, Adding PCI cards, Removing a memory module

Upgrading AGP screen controllers

Removing a memory module

1

1

►Push the clips on the right and left of the memory slot outward (1).

►Pull the memory module out of the memory slot (2).

Upgrading AGP screen controllers

Technical data

The AGP slot supports the modes 4x/8x with 32 bits and 66 MHz. Only 1.5 V AGP graphics cards are supported.

Some older 3.3 V AGP graphics cards are coded like 1.5 V AGP graphics cards. The i installation of such 3.3 V AGP graphics cards can cause serious damage to the

mainboard and the AGP graphics cards.

Adding PCI cards

Technical data

32 bit / 33 MHz PCI slots

3,3 V supply voltage

3.3V auxiliary voltage Rev. 2.3

A26361-D1961-Z120-1-7419, edition 2 English - 21