Fujitsu D1961 technical manual Bios Recovery Recovering System Bios

Page 35

BIOS Recovery - Recovering System BIOS

BIOS Recovery - Recovering System BIOS

i

All BIOS settings are reset to the default values.

Open the casing as described in the operating manual.

Set the switch for "Restore system BIOS" to ON.

Close the casing as described in the operating manual.

Insert a BIOS update floppy disk and start the PC.

Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. This can take a few minutes.

Open the casing as described in the operating manual.

Set the switch for "Restore system BIOS" to OFF.

Close the casing as described in the operating manual.

Remove the floppy disk from the drive.

Start the PC and invoke BIOS Setup.

Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.

Save the change and terminate BIOS Setup.

The BIOS recovery has now been completed. The system restarts.

i

Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"

("Drivers & Utilities" CD).

A26361-D1961-Z120-1-7419, edition 2

English - 25

Image 35
Contents English AnswersSie haben Page A26361-D1961-Z120-1-7419 Ausgabe Januar January 2005 edition Mainboard D1961Technisches Handbuch Technical Manual Page 11 10 Übersicht/Overview Mainboard D1961Page Contents Page Additional information Notational conventionsInformation about boards Important notesSpecial onboard features List of featuresOnboard features External ports Internal portsSpecial features Prior to installation Brief instructions on installing mainboardDriver installation InstallationLED 1 green Interfaces and connectorsExternal ports LAN portAudio front panel Internal ports and connectorsOr 6-channel audio mode via analogue audio channels Hard disk connectionAnalogue 4-channel audio output Using external audio connectionsSelecting settings for 2, 4 or 6-channel audio mode Analogue 2-channel audio outputAudio Pin assignment of internal portsFront panel Fan 1 Audio front panelUSB dual channel Floppy interface ATA interface Additional power supply ATX12 Power supply BTXRecovering System Bios pinpair B Settings with switches and jumpersSetting via control-panel plug connector Skipping system and Bios Setup password pinpair aReplacing the processor Installing processor with heat sinkTechnical data Add-on modules / UpgradingReplacing the processor Mounting heat sink Upgrading main memory Installing a memory moduleRemoving a memory module Upgrading AGP screen controllersAdding PCI cards Monofunctional expansions cards PCI bus interrupts Selecting correct PCI slotAudio Modem Replacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateWhen should a Bios update be carried out? Bios Recovery Recovering System Bios When should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers Mainboard current requirement AnnexElectrical Properties Loadability for connections and fusesLED APM and Acpi system status, energy-saving modesMainboard Revision Mainboard Revision and Bios VersionBios version Bios update for installed CPU failed Error messagesError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary