Fujitsu BX600 manual Configuration Commands Port-backup, Default Setting Command Mode

Page 164

Device Configuration Commands

Command Reference

7.4.7.2Configuration Commands

7.4.7.2.1port-backup

This command is used to enable or disable port backup for a uplink set

Syntax

port-backup <uplinkSetName> no port-backup <uplinkSetName>

<uplinkSetName> - A string associated with uplink set as a convenience. It should be an existing uplink set.

no - This command disable port backup for an existing port group.

Default Setting

None

Command Mode

Global Config

This command is used to set the failback time of port backup for a uplink set.

Syntax

port-backup <uplinkSetName> failback-time <value> no port-backup <uplinkSetName> failback-time

<uplinkSetName> - A string associated with uplink set a convenience. It should be an existing uplink set.

<value> - Time value is range from 1 to 60 seconds. Default value is 60 seconds. no - This command set the failback time to default value for the specific uplink set.

Default Setting

60

Command Mode

Global Config

This command is used to move a port from active-port list to backup-port list.

Syntax

port-backup no port-backup

163	Intelligent Blade Panel Module

Image 164

Contents Primergy BX600 Blade Server Systems Primergy BX600 Blade Server Systems Comments… Suggestions… Corrections… Page Contents Intelligent Blade Panel Module Intelligent Blade Panel Module Intelligent Blade Panel Module Important Notes Information About BoardsCompliance Statements Industry Canada Class aLVD Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Introduction Features of the IBP Module Layer 2 Features Igmp Snooping Vlan Transparency Supported FeaturesSelf-Learning MAC Addresses Automatic Aging for MAC AddressesService Vlan & Service LAN Support Port Backup SupportUplink Set Support Port Group SupportBootP and Dhcp Clients IBP Module Management FeaturesSave Configuration as file Various Files of Management OperationSnmp Alarms and Trap Logs Configuration File Download and UploadCommand Line Interface ProvisionSecurity Feature Port Based AuthenticationLocked Port Support Radius ClientDescription of Hardware System LEDInternal Ports Page Primergy GbE Switch Blade 30/12 Internal Ports List Primergy BX620Features and Benefits Status of LEDsPort LEDs ConnectivityPerformance ManagementNotational Conventions Target Group Technical Data DimensionsElectrical data National and international standardsEnvironmental conditions Network Planning Introduction to IBPConnecting to 1000BASE-T Devices Making Network ConnectionsCable Testing for Existing Category 5 Cable 1000BASE-T Cable RequirementsAdjusting Existing Category 5 Cabling for 1000BASE-T 1000BASE-T Pin AssignmentsUnpacking the IBP Module Package ContentsOverview Connecting the IBP Module Mount the IBP ModuleSelect 2 Console Redirection Switch Blade Start up and Configuration the IBP Module Port Default SettingsConfiguring the Terminal Under Properties, select VT100 for Emulation modeBooting Device Software Download Erasing the Device ConfigurationBoot Image Download Operation Code CLI Software Download Through Tftp Server System Image DownloadTftp Enter y. The device reboots Overview Configurable Data Non-Configurable DataCommand Buttons Main MenuGroups Administration View Uplink Set InformationManaging Port Groups Configuring Port Group Configuration Command Buttons Viewing Port Group Information Selection Criteria Viewing Vlan Port Group Information Groups Administration Configurable Data Viewing Service LAN Information Groups Administration Configurable Data Viewing Service Vlan Information Groups Administration Managing Port Backup Configuring Port Backup Configuration Viewing Port Backup Status Groups Administration Panel Settings Menu Panel Settings Menu Viewing Panel Description Page Configurable Data Configuring Inband Administration Terminal interface via the EIA-232 portPanel Settings Menu Configuring Telnet Session Page Configurable Data Panel Settings Menu Configuring Serial Port Page Configurable Data Selection Criteria Panel Settings Menu Defining Dhcp Client Configuring Dhcp Restart Configuring Dhcp Client-identifierDefining Snmp Configuring Snmp Community Configuration Configuring Snmp Trap Receiver Configuration Viewing Snmp supported MIBs Panel Settings Menu Panel Settings Menu Viewing Sntp Global Status Non-Configurable Data Configuring Sntp Server Configuration Configurable Data Viewing Sntp Server Status Non-Configurable Data Unknown IPV4Panel Settings Menu Configurable Data Panel Settings Menu Refresh Refresh the configuration value again Reset the Passwords to Defaults Page Command Buttons Managing System Utilities Panel Reset Command ButtonsReset All Configuration to Defaults Page Command Buttons Configurable Data Uploading Specific Files from Panel Removing Specific File Copying Running Configuration to Panel Defining Ping FunctionSubmit This will initiate the ping Security Menu Viewing Radius Statistics Page Non-Configurable Data Viewing Radius Server Statistics Page Selection Criteria Security Menu Security Menu Resetting All Radius Statistics Page Command Buttons Configurable Data Security Menu Non-Configurable Data Security Menu Extended Configuration Menu Viewing Buffered LogConfiguring Command Logger Page Configurable Data Configuring Console Log Viewing Event LogConfiguring Hosts configuration Page Configurable Data Configuring syslog configuration Page Configurable Data Extended Configuration Menu Viewing Login Session Page Non-Configurable Data 107 Intelligent Blade Panel Module 108 Intelligent Blade Panel Module 109 Intelligent Blade Panel Module 110 Intelligent Blade Panel Module 111 112 Intelligent Blade Panel Module 113 Intelligent Blade Panel Module Extended Configuration Menu Extended Configuration Menu Viewing Each Port Summary Statistics Page Selection Criteria 117 Intelligent Blade Panel Module 118 Intelligent Blade Panel Module 119 Intelligent Blade Panel Module 120 Intelligent Blade Panel Module Viewing Access Control Summary Page Non-Configurable Data 122 Intelligent Blade Panel Module 123 Intelligent Blade Panel Module Defining Access Control User Login Page Selection Criteria Defining Each Port Access Privileges Page Selection Criteria Extended Configuration Menu Managing IP Filter IP Filter Configuration 128 Intelligent Blade Panel Module Defining User Login 130 Intelligent Blade Panel Module CLI Command Format CommandExample Ip address ipaddr netmask vlan-id Example Clear port-groupValues 2CLI Mode-based TopologyParameters Conventions Network Address Syntax Address Type Format Range IPAddrMacAddr AnnotationsSystem Information and Statistics commands Show running-config Show eventlogShow running-config all scriptname Show sysinfoShow hardware Show systemSystem Information Show version Show loginsession Show interface status slot/port all 4Device Configuration CommandsInterface Show interface status Show interface counters Show interfaceShow interface slot/port 142 Intelligent Blade Panel Module Show interface counters detailed slot/port switchport Total Packets Transmitted Octets Total Packets Received Without ErrorsTotal Packets Received with MAC Errors Total Transmited Packets Discards Total Transmit ErrorsTotal Packets Transmitted Successfully 146 Intelligent Blade Panel Module Show interface switch Show interface IBPInterface Interface rangeSpeed-duplex Speed-duplex 10 100 full-duplex half-duplexSpeed-duplex all 10 100 full-duplex half-duplex Full duplex Full duplex half duplex Half duplexNegotiate all no negotiate all NegotiateNegotiate no negotiate Capabilities Storm-control flowcontrol no storm-control flowcontrol DescriptionStorm-control flowcontrol Syntax Show mac-addr-table macaddr all Show mac-address-table igmpsnooping Show mac-address-table multicast Show mac-address-table multicast macaddr vlanid allShow mac-address-table stats Default Setting Show mac-address-table agetime Default SettingShow mac-address-table stats Show mac-address-table agetimeIgmp Snooping Show Commands Show igmp snooping Mac-address-table aging-timeConfiguration Commands Igmpsnooping Igmpsnooping uplinkSetName no igmpsnooping uplinkSetNamePort Channel Lacp Lacp uplinkSetName no lacp uplinkSetNameUplink Sets Show Commands Show lacpPort Group Configuration Commands Uplink-setUplink-set uplinkSetName no uplink-set uplinkSetName Configuration Commands Port-group Port-group portGroupName no port-group portGroupNamePort Backup Show Commands Configuration Commands Port-backup Port-backup uplinkSetName no port-backup uplinkSetNameDefault Setting Command Mode Port-backup no port-backupLink State Show Commands Configuration Commands LinkstateShow vlan-group vlanGroupName Vlan Port Groups Show CommandsLinkstate uplinkSetName no linkstate uplinkSetName Configuration Commands Vlan-group Vlan-group vlanGroupName no vlan-group vlanGroupName167 Intelligent Blade Panel Module Service LAN Show Commands Configuration Commands Svc-lanSvc-lan svcLanName no svc-lan svcLanName Service Vlan Show Commands Configuration Commands Svc-vlanSvc-vlan svcVlanName no svc-vlan svcVlanName Show ip redirects Management CommandsNetwork Commands Show ip interface Mtu 1518-9216 no mtu Show ip filter1.4 mtu Command Usage Ip default-gatewayIp default-gateway gateway no ip default-gateway Ip addressIp address mgmt-vlan Ip address protocol bootp dhcp vlanID noneIp address protocol Ip filter Ip filter no ip filterSerial Interface Commands Show line console Ip filter ipaddr no ip filter ipaddrLine console BaudratePassword-threshold 0-120 no password-threshold Exec-timeoutPassword-threshold Telnet host port debug line echo Telnet Session CommandsSilent-time Show line vty Line vtyExec-timeout 1-160 no exec-timeout Sessions MaxsessionsMaxsessions 0-5 no maxsessions Sessions no sessions Telnet sessionsTelnet sessions no telnet sessions Telnet maxsessionsTelnet maxsessions 0-5 no maxsessions Telnet exec-timeoutTelnet exec-timeout 1-160 no telnet exec-timeout Snmp Server Commands Show snmp Show telnetShow trapflags Snmp-server sysname Snmp-server sysname nameSnmp-server location Syntax Snmp-server location locSnmp-server community name no snmp-server community name Snmp-server contactSnmp-server community 190 Intelligent Blade Panel Module Snmp-server community ro rw name Snmp-server host ipaddr name no snmp-server host name Snmp-server enable trapsSnmp-server host No This command disables Multiple User trap Snmp Trap Commands Show snmptrap Snmp trap link-status all no snmp trap link-status all Snmp trap link-statusSnmp trap link-status no snmp trap link-status Snmptrap ipaddr Snmptrap name ipaddrSnmptrap name ipaddr no snmptrap name ipaddr Snmptrap mode Snmptrap mode name ipaddr no snmptrap mode name ipaddrHttp commands Show ip http Snmptrap ipaddr name ipaddr ipaddrnewIp javamode Ip javamode no ip javamodeIp http port Ip http port 1-65535 no ip http portIp http server Ip http server no ip http serverIp http secure-port Ip http secure-port portid no ip http secure-portIp http secure-server Ip http secure-server no ip http secure-serverSecure Shell SSH Commands Show ip ssh Ip http secure-protocolIp ssh protocol Ip sshIp ssh no ip ssh Ip ssh maxsessions 0-5 no ip ssh maxsessions Ip ssh timeoutIp ssh maxsessions Ip dhcp client-identifier Ip ssh timeout 1-160 no ip ssh timeoutDhcp Client Commands Ip dhcp restart System Burned In MAC Address Lock Commands Lockmessage messagestring defaultLock lockidentifier Exclusive no lock lockidentifierALL LockmessageLockreset Show lockShow logging buffered System Log Management CommandsShow Commands Show logging Show logging hosts Show logging traplogShow logging traplogs Logging buffered no logging buffered Configuration Commands Logging bufferedDisplay Message Index used for deleting Logging console severitylevel 0-7 no logging console Logging buffered wrap no logging buffered wrapLogging console Logging host Logging host hostaddress port severitylevelLogging syslog no logging syslog Logging host reconfigure hostindex hostaddressLogging syslog Logging syslog port portid no logging syslog port Clear logging bufferedScript Management Commands Script applyScript apply scriptname Script deleteScript show scriptname Script listScript show Configuration Commands Username User Account Management CommandsShow Commands Show users Username username password nopassword no username username Username snmpv3 authenticationUsername snmpv3 encryption Show authentication Security CommandsShow Commands Show users authentication Show authentication users Show dot1xShow dot1x detail Show dot1x statistics Show dot1x statistics slot/portShow dot1x users Show dot1x summaryShow dot1x summary slot/port all Show radius Secret Configured Yes / NoShow radius-servers Radius Accounting Mode Enabled or disabled Show radius accounting statistics ipaddrShow radius statistics ipaddr Secret Configured Yes or NoShow radius statistics Show tacacs Show port-security Show port-security dynamic slot/port Configuration Commands Authentication login Username defaultlogin Possible method values are local, radius, reject, and tacacsUsername login Username login user listname3 Dot1x Configuration Commands 3.1 dot1x initialize 3.2 dot1x default-login3.3 dot1x login Dot1x login user listname3.4 dot1x system-auth-control Dot1x system-auth-control no dot1x system-auth-control3.5 dot1x user 3.6 dot1x port-control3.7 dot1x max-req 3.8 dot1x re-authentication Dot1x re-authentication no dot1x re-authentication3.9 dot1x re-reauthenticate Dot1x max-req 1-10 no dot1x max-req3.10 dot1x timeout Radius Configuration Commands Radius accounting mode Radius accounting mode no radius accounting modeRadius-server host Radius-sever keyRadius-server retransmit Retries the maximum number of times Range 1Radius-server msgauth Radius-server timeoutRadius-server timeout seconds no radius-server timeout Tacacs no tacacs Tacacs Configuration CommandsRadius-server primary Tacacs mode Tacacs mode 1-3 master slave no tacacs modeTacacs server-ip Tacacs server-ip 1-3 ipaddr no tacacs server-ipTacacs port Tacacs port 1-3 1-65535 no tacacs portTacacs key Tacacs key 1-3 no tacacs keyTacacs timeout Tacacs timeout 1-3 1-255 no tacacs timeoutTacacs retry Tacacs retry 1-3 1-9 no tacacs retryPort-security max-dynamic Port Security Configuration Commands Port-securityPort-security no port-security Default Setting Port-security max-static Port-security max-static 0-20 no port-security max-staticPort-security mac-address move Syntax Port-security mac-address move Default SettingPort-security mac-address Show sntp client Sntp CommandsShow Commands Show sntp Configuration Commands Sntp broadcast client poll-interval Sntp client modeSntp client mode broadcast unicast no sntp client mode Sntp unicast client poll-interval Sntp client portSntp client port portid 6-10 no sntp client port Sntp unicast client poll-timeout Sntp unicast client poll-retrySntp server Sntp clock timezoneSystem Utilities 10.2.9Sntp clock timezone name 0-12 0-59 before-utc after-utc Clear Clear arpClear traplog Clear eventlogClear config Clear passSyntax Clear mac-addr-table dynamic Default Setting Clear mac address tableClear counters Clear counters slot/port allEnable passwd Clear igmp snoopingClear dot1x statistics all slot/port Clear ip filterClear dot1x statistics Copy Clear radius statisticsClear tacacs Privileged Exec Files download from PC to board Syntax Copy running-config startup-config filename 11.4 dir Copy clibanner url copy url clibanner no clibannerDelete Dir boot-rom config opcode filename WhichbootBoot-system Display Message Column Heading DescriptionBoot-system boot-rom config opcode filename PingTraceroute Logging cli-command Syntax Logging cli-command Default SettingCalendar set Calendar set mm/dd/yy hhmmssConfigure ReloadDisconnect Disconnect 0-10 allPromptstring Prompt string Default Setting HostnameHostname promptstring QuitDhcp Commands Ip dhcp client-identifier text text hex hexUsing Snmp Supported MIBs Standard MIBs are listed in the following tablePrivate enterprise MIB is listed below Accessing MIB Objects RFC 2233 IF-MIBAccessing MIB ObjectsUsing Snmp 279 Intelligent Blade Panel Module Supported Traps Snmp traps supported include the following itemsDefault Settings Overview system default settingsDefault settings for all the configuration commands SSLPage In-band Administration SSH DSA Key SSH RSA1 Key SSH RSA2 Key Troubleshooting and Tips Diagnosing IBP IndicatorsAccessing the Management Interface Symptom ActionInformation on this document

Related manuals

Manual 46 pages 40.75 Kb

Manual 288 pages 28.92 Kb

Manual 274 pages 29.29 Kb