System Log Management Commands |
| Command Reference |
Default Setting
None
Command Mode
Privileged Exec
Display Message
Message: The message that has been logged.
Note: Message log information is not retained across a system reset.
7.6.3show logging traplog
This command displays the trap log maintained by the IBP.
The trap log contains a maximum of 256 entries that wrap.
Syntax |
Show logging traplogs |
Default Setting
None
Command Mode
Privileged Exec
Display Message
Number of Traps since last reset: The number of traps that have occurred since the last reset of this device.
Trap Log Capacity: The maximum number of traps that could be stored in the IBP.
Log: The sequence number of this trap.
System Up Time: The relative time since the last reboot of the IBP at which this trap occurred.
Trap: The relevant information of this trap.
Note: Trap log information is not retained across a IBP reset.
7.6.3.1show logging hosts
This command displays all configured logging hosts.
209 | Intelligent Blade Panel Module |
|