IBM PANEL1173-841 user manual Virus Warning, CPU L1 & L2 Cache, Quick Power On Self Test

Page 44

PANEL1173-841 User’s Manual

zVirus Warning

This option flashes on the screen. During and after the system boot up, any attempt to write to the boot sector or partition table of the hard disk drive will halt the system with the following message. You can run an anti-virus program to locate the problem. The default setting is “Disabled”.

! WARNING !

Disk boot sector is to be modified

Type “Y” to accept write or “N” to abort write

Award Software, Inc.

 

It automatically activates while the system

Enabled

boots up and a warning message appears

for an attempt to access the boot sector or

 

 

hard disk partition table.

 

No warning message will appear for

Disabled

attempts to access the boot sector or hard

 

disk partition table.

NOTE This function is only available with DOS and other operating systems that do not trap INT13.

zCPU L1 & L2 Cache

These two options speed up memory access. However, it depends on the CPU/chipset design. The default setting is “Enabled”. CPUs with no built-in internal cache will not provide the “CPU Internal Cache” item on the menu.

Enabled

Enable cache

Disabled

Disable cache

zQuick Power On Self Test

This option speeds up Power on Self Test (POST) after you turn on the system power. If set as Enabled, BIOS will shorten or skip some check items during POST. The default setting is “Enabled”.

Enabled

Enable Quick POST

Disabled

Normal POST

36

Phoenix-Award BIOS Utility

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Page Disclaimers All Rights Reserved August 2008, Version A1Safety Approvals ‹ FCC ComplianceSafety Precautions Trademarks Acknowledgments Table of Contents Vii Memo A p t e r Introduction Powerful computing Intel Core2 Duo processor General DescriptionExpandable for 2 PCI slots Speaker & Wlan antenna supported2 I/O System System SpecificationsMain CPU Board System Specification Dimension Main Body Size Operation TemperatureRelative Humidity AltitudeDimensions 841Front View and I/O Outlets Front View2 I/O Outlets Package List Memo Installing the CPU and Dram „ Hard Disk„ Add-On Card „ Serial Port „ Ethernet „ Mounting WaysHardware Installation Dram CPU Installing the the Hard Disk Drive ¾ Installing Dual 3.5 HDD PANEL1173-841 User’s Manual PANEL1173-841 User’s Manual PANEL1173-841 User’s Manual ¾ Installing 2.5 HDD PANEL1173-841 User’s Manual CD-ROM Installation Add-on Card Installation PANEL1173-841 User’s Manual Serial Port Interface DVI-ITXC+ CRT-RED CRT-GREEN CRT-BLUE CRT-HSYNC Vgagnd Ethernet Mountings Way Panel/ Rack Panel MountingRack Mounting A p t e r Phoenix-Award Bios Utility Entering SetupStatus Page Setup Menu/Option Page Setup Menu Control KeysGetting Help Main MenuMain Menu Time Standard Cmos Setup MenuDate Halt On IDE Primary Master/Primary SlaveVideo Advanced Bios Features CPU Feature Hard Disk Boot PriorityCPU L1 & L2 Cache Quick Power On Self TestVirus Warning First/Second/Third Boot Device Boot Other DeviceBoot Up Floppy Seek Boot Up NumLock StatusTypematic Delay Msec Apic ModeTypematic Rate Chars/Sec Security OptionMPS Version Control For OS Small Logo EPA ShowMemory Hole At 15M-16M Advanced Chipset FeaturesSystem Bios Cacheable VGA Setting PEG/Onchip VGA Control Dvmt ModePCI Express Root Port Func On-Chip Frame Buffer SizeBoot Display Integrated Peripherals¾ IDE HDD Block Mode ¾ IDE DMA transfer accessOnChip IDE Device ¾ On-Chip Primary/Secondary PCI IDE¾ Sata Mode ¾ Legacy Mode Support¾ IDE Master/Slave PIO ¾ IDE Master/Slave UdmaSuper IO Device ¾ Onboard FDC Controller¾ Onboard Serial Port 1/2/3/4 ¾ Serial Port 1/2/3/4 Use IRQ¾ Parallel Port Mode ¾ ECP Mode Use DMAOnboard Lan1/Lan2 Boot ROM USB Device SettingPower Management Setup Acpi Function Acpi Suspend TypeRun Vgabios if S3 Resume Power ManagementVideo Off Method Video Off In SuspendSuspend Mode HDD Power DownPower On by Ring Resume by AlarmReload Global Timer Events Primary/Secondary IDE 0/1FDD, COM, LPT Port PCI PIRQA-D#10 PnP/PCI Configuration Setup Reset Configuration DataResources Controlled By IRQ ResourcesPCI/VGA Palette Snoop PCI Express relative items Maximum Payload SizeShutdown Temperature Current System TemperatureCurrent CPU Temperature PC Health StatusFrequency/Voltage Control CPU Clock RatioAuto Detect PCI Clk Spread SpectrumLoad Optimized Defaults Set Supervisor/User Password Save & Exit Setup Exit Without Saving Memo A p t e r Driver Installation SystemSpecification Touch ScreenDriver Installation Windows 2000/XP/Vista Select the Standard Calibrate tab PANEL1173-841 User’s Manual Comm. Port COMn IRQn Driver Installation DOS¾ Identify the Communication Port and IRQ Number ¾ Do Calibration ¾ Initializing the PenMount DriverMemo Power Supply FSP250-50GUB 250W, AC100~240V Input Electrical RequirementsHOLD-UP Time @FULL Load Efficiency Environmental RequirementsSafety Reliability

PANEL1173-841 specifications

The IBM PANEL1173-841 is a sophisticated panel display designed to enhance user interaction with various computing systems. As part of IBM's long-standing tradition of innovation in technology, the PANEL1173-841 showcases a blend of functionality and advanced technology features that make it an exceptional choice for both professionals and enthusiasts.

One of the standout features of the PANEL1173-841 is its high-resolution display. The panel offers a vibrant and crisp visual experience, ensuring that users can view detailed graphics and data with stunning clarity. This attribute is particularly advantageous in applications such as engineering, design, and data analysis, where precision is crucial. With a user-friendly interface, the panel is designed to facilitate quick access to essential functions, reducing the learning curve for new users.

The PANEL1173-841 employs cutting-edge LCD technology, which not only provides excellent color reproduction but also supports a wide viewing angle. This characteristic is instrumental in collaborative environments where multiple users may be viewing the screen simultaneously. Additionally, the LCD technology enhances the overall energy efficiency of the unit, contributing to a lower total cost of ownership.

In terms of connectivity, the IBM PANEL1173-841 is compatible with various devices, including servers, workstations, and other peripherals. It supports multiple input options, ensuring versatility in its application across diverse industries. This connectivity allows seamless integration into existing IT infrastructures, making it an efficient choice for organizations looking to modernize their systems without extensive overhauls.

Another notable characteristic of the PANEL1173-841 is its durability. Built to withstand the rigors of demanding environments, the panel display is designed for long-term performance. Its robust construction protects against physical wear and environmental factors, making it suitable for industrial applications.

Moreover, the IBM PANEL1173-841 incorporates user-centric design elements, such as adjustable mounting options and ergonomic features that enhance comfort during extended use. This focus on user experience underscores IBM's commitment to delivering products that not only perform well but also promote well-being in the workplace.

Ultimately, the IBM PANEL1173-841 exemplifies IBM's dedication to quality and innovation in panel display technology. With its high-resolution display, seamless connectivity, durability, and user-centric design, it stands out as a premium choice for anyone seeking to augment their computing experience. Whether for professional or personal use, the PANEL1173-841 is engineered to meet the demands of a fast-paced, technologically advanced world.
Top Page Image Contents