IBM PANEL1173-841 Suspend Mode, HDD Power Down, Soft-Off by PWR-BTTN, Wake-Up by PCI card

Page 58

PANEL1173-841 User’s Manual

connect the fax/modem to the board Wake On Modem connector for working this feature.

zSuspend Mode

After the selected period of system inactivity (1 minute to 1 hour), all devices except the CPU shut off. The default value is “Disabled”.

Disabled

System will never enter SUSPEND mode

 

Defines the continuous idle time before the system

1/2/4/6/8/10/2

entering SUSPEND mode.

0/30/40

If any item defined in (J) is enabled & active,

SUSPEND timer will be reloaded

Min/1 Hr

 

zHDD Power Down

If HDD activity is not detected for the length of time specified in this field, the hard disk drive will be powered down while all other devices remain active.

zSoft-Off by PWR-BTTN

This option only works with systems using an ATX power supply. It also allows the user to define which type of soft power OFF sequence the system will follow. The default value is “Instant-Off”.

 

This option follows the conventional manner systems

Instant-Off

perform when power is turned OFF. Instant-Off is a soft

power OFF sequence requiring only the switching of the

 

 

power supply button to OFF

 

Upon turning OFF system from the power switch, this

 

option will delay the complete system power OFF

Delay 4 Sec.

sequence by approximately 4 seconds. Within this delay

 

period, system will temporarily enter into Suspend Mode

 

enabling you to restart the system at once.

zWake-Up by PCI card

If enable this item, the system can automatically resume when the PCI Modem or PCI LAN card receives an incoming call.

zPower On by Ring

This option allows the system to resume or wake up upon detecting any ring signals coming from an installed modem. The default value is “Enabled”.

zResume by Alarm

If enable this item, the system can automatically resume after a fixed time in accordance with the system’s RTC (realtime clock).

50

Phoenix-Award BIOS Utility

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Page Disclaimers All Rights Reserved August 2008, Version A1Safety Approvals ‹ FCC ComplianceSafety Precautions Trademarks Acknowledgments Table of Contents Vii Memo A p t e r Introduction Expandable for 2 PCI slots Powerful computing Intel Core2 Duo processorGeneral Description Speaker & Wlan antenna supportedMain CPU Board System Specifications2 I/O System System Specification Relative Humidity Dimension Main Body SizeOperation Temperature AltitudeDimensions 841Front View and I/O Outlets Front View2 I/O Outlets Package List Memo „ Add-On Card „ Serial Port Installing the CPU and Dram„ Hard Disk „ Ethernet „ Mounting WaysHardware Installation Dram CPU Installing the the Hard Disk Drive ¾ Installing Dual 3.5 HDD PANEL1173-841 User’s Manual PANEL1173-841 User’s Manual PANEL1173-841 User’s Manual ¾ Installing 2.5 HDD PANEL1173-841 User’s Manual CD-ROM Installation Add-on Card Installation PANEL1173-841 User’s Manual Serial Port Interface DVI-ITXC+ CRT-RED CRT-GREEN CRT-BLUE CRT-HSYNC Vgagnd Ethernet Mountings Way Panel/ Rack Panel MountingRack Mounting A p t e r Phoenix-Award Bios Utility Entering SetupGetting Help Status Page Setup Menu/Option Page Setup MenuControl Keys Main MenuMain Menu Date Standard Cmos Setup MenuTime Video IDE Primary Master/Primary SlaveHalt On Advanced Bios Features CPU Feature Hard Disk Boot PriorityVirus Warning Quick Power On Self TestCPU L1 & L2 Cache Boot Up Floppy Seek First/Second/Third Boot DeviceBoot Other Device Boot Up NumLock StatusTypematic Rate Chars/Sec Typematic Delay MsecApic Mode Security OptionMPS Version Control For OS Small Logo EPA ShowSystem Bios Cacheable Advanced Chipset FeaturesMemory Hole At 15M-16M PCI Express Root Port Func VGA Setting PEG/Onchip VGA ControlDvmt Mode On-Chip Frame Buffer SizeBoot Display Integrated PeripheralsOnChip IDE Device ¾ IDE HDD Block Mode¾ IDE DMA transfer access ¾ On-Chip Primary/Secondary PCI IDE¾ IDE Master/Slave PIO ¾ Sata Mode¾ Legacy Mode Support ¾ IDE Master/Slave Udma¾ Onboard Serial Port 1/2/3/4 Super IO Device¾ Onboard FDC Controller ¾ Serial Port 1/2/3/4 Use IRQOnboard Lan1/Lan2 Boot ROM ¾ Parallel Port Mode¾ ECP Mode Use DMA USB Device SettingPower Management Setup Acpi Function Acpi Suspend TypeVideo Off Method Run Vgabios if S3 ResumePower Management Video Off In SuspendPower On by Ring Suspend ModeHDD Power Down Resume by AlarmFDD, COM, LPT Port Reload Global Timer EventsPrimary/Secondary IDE 0/1 PCI PIRQA-D#Resources Controlled By 10 PnP/PCI Configuration SetupReset Configuration Data IRQ ResourcesPCI/VGA Palette Snoop PCI Express relative items Maximum Payload SizeCurrent CPU Temperature Shutdown TemperatureCurrent System Temperature PC Health StatusAuto Detect PCI Clk Frequency/Voltage ControlCPU Clock Ratio Spread SpectrumLoad Optimized Defaults Set Supervisor/User Password Save & Exit Setup Exit Without Saving Memo A p t e r Driver Installation SystemSpecification Touch ScreenDriver Installation Windows 2000/XP/Vista Select the Standard Calibrate tab PANEL1173-841 User’s Manual ¾ Identify the Communication Port and IRQ Number Driver Installation DOSComm. Port COMn IRQn ¾ Do Calibration ¾ Initializing the PenMount DriverMemo Power Supply FSP250-50GUB 250W, AC100~240V Input Electrical RequirementsHOLD-UP Time @FULL Load Efficiency Environmental RequirementsSafety Reliability

PANEL1173-841 specifications

The IBM PANEL1173-841 is a sophisticated panel display designed to enhance user interaction with various computing systems. As part of IBM's long-standing tradition of innovation in technology, the PANEL1173-841 showcases a blend of functionality and advanced technology features that make it an exceptional choice for both professionals and enthusiasts.

One of the standout features of the PANEL1173-841 is its high-resolution display. The panel offers a vibrant and crisp visual experience, ensuring that users can view detailed graphics and data with stunning clarity. This attribute is particularly advantageous in applications such as engineering, design, and data analysis, where precision is crucial. With a user-friendly interface, the panel is designed to facilitate quick access to essential functions, reducing the learning curve for new users.

The PANEL1173-841 employs cutting-edge LCD technology, which not only provides excellent color reproduction but also supports a wide viewing angle. This characteristic is instrumental in collaborative environments where multiple users may be viewing the screen simultaneously. Additionally, the LCD technology enhances the overall energy efficiency of the unit, contributing to a lower total cost of ownership.

In terms of connectivity, the IBM PANEL1173-841 is compatible with various devices, including servers, workstations, and other peripherals. It supports multiple input options, ensuring versatility in its application across diverse industries. This connectivity allows seamless integration into existing IT infrastructures, making it an efficient choice for organizations looking to modernize their systems without extensive overhauls.

Another notable characteristic of the PANEL1173-841 is its durability. Built to withstand the rigors of demanding environments, the panel display is designed for long-term performance. Its robust construction protects against physical wear and environmental factors, making it suitable for industrial applications.

Moreover, the IBM PANEL1173-841 incorporates user-centric design elements, such as adjustable mounting options and ergonomic features that enhance comfort during extended use. This focus on user experience underscores IBM's commitment to delivering products that not only perform well but also promote well-being in the workplace.

Ultimately, the IBM PANEL1173-841 exemplifies IBM's dedication to quality and innovation in panel display technology. With its high-resolution display, seamless connectivity, durability, and user-centric design, it stands out as a premium choice for anyone seeking to augment their computing experience. Whether for professional or personal use, the PANEL1173-841 is engineered to meet the demands of a fast-paced, technologically advanced world.
Top Page Image Contents