Fujitsu P2U3-0022-04ENZ0 manual Stxpollset.sh, Www/index.htm

Page 16

Chapter 1 Installing ETERNUSmgr

> 1.6 Procedure

_STXPOLL.INI, STXPOLL_1.INI

STXPOLL_1.INI is a setup file of ETERNUSmgr.

It is created by executing the environment setup script.

If necessary, a text editor such as Notepad, etc. can be used to edit these settings. _STXPOLL.INI file is a template file.

Refer to the "ETERNUSmgr User Guide -Introduction-" when editing these setup files. Edit only parameters described in the guide. Do not delete comments or blank lines in the setup files during installation, and do not add anything other than parameters. Failure to follow these instructions may hinder performance and cause problems during future upgrades.

The following format should be used for the file names.

Format:STX~.INI

If a file name is in a format other than specified above, ETERNUSmgr will not be able to find the file. The only place the setup file can be saved is the installation directory. If saved to another directory, the ETERNUSmgr cannot recognize where the setup files are saved.

The "STX~.INI" file name format must never be given to non-setup files in the installation directory since, whether they are setup files or not, ETERNUSmgr will attempt to read all such "STX~.INI" files, with unforeseeable and potentially fatal results. If you want to make backup files, save them with a different file name format, or save them outside of the installation directory to prevent ETERNUSmgr from attempting to use them.

ETERNUSmgr allows multiple setup files to be stored in the installation directory, so error monitoring can be carried out for the specified devices using the respective files. However, multiple monitoring settings cannot be made for one device.

If multiple setup files for the same device are detected, a warning message will appear and ETERNUSmgr will not start up. For further details, refer to "2.5 Monitoring Multiple Target Devices" in the "ETERNUSmgr User Guide -Introduction-".

stxpoll

Execution control script for starting up or stopping the ETERNUSmgr.

stxpollset.sh

Shell script to conduct environment setup after installation by rpm. Creates the ETERNUSmgr setup file "STXPOLL_1.INI". "stxpollset.sh" can be executed many times, but if it is executed when "STXPOLL_1.INT" already exists, the setup file will be overwritten, so caution is advised. If "stxpollset.sh" needs to be executed a second time, first backup the ETERNUSmgr setup file, and then execute.

www/index.htm

This file contains the initial screen. After 5 seconds, it automatically jumps to the ETERNUSmgr Top Menu.

To use this file, copy it to a directory under the Web server where the top menu is stored. During installation, there is no need to copy this file to the specified directory under the top menu if the default directory is used.

P2U3-0022-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux

16

Copyright 2009 FUJITSU LIMITED

 

Image 16
Contents Page Page Content and Structure PrefaceContents Installing ETERNUSmgr ETERNUSmgr CD-ROMREADMEja.TXT READMEen.TXTBin/sol/ETERNUSV20L30.PKG Bin/hp/ETERNUSV20L30.HPBin/aix/ETERNUSV20L3\30.AIX Bin/linux/eFJSVgrmgr-V20L30-1.i386.rpmInstalling ETERNUSmgr ETERNUSmgr CD-ROM Installation Outline Supported EnvironmentRequired Hardware/Software For Eternus GR series and ETERNUS3000 model 50, useInstallation Notes For ETERNUS6000, useProcedure Web Directory and Web Directory FilesInstallation by rpm Command Select the type of target device ETERNUSmgr VxxLxx Http Polling engine was started Stxpolld StxchkStxpollset.sh StxpollWww/index.htm Www/menu.htm SetupWww/fujitsu.gif, www/eternus.gif Login as superuser Daemon RegistrationUninstalling ETERNUSmgr Log in as the superuserUninstalling ETERNUSmgr Appendix a How to Set Up the Web Server ExampleReboot apache Procedure Etc/init.d/httpd restart Index STXPOLL.INI STXPOLL1.INI