Fujitsu P2U3-0022-04ENZ0 manual ETERNUSmgr VxxLxx Http Polling engine was started

Page 14

Chapter 1 Installing ETERNUSmgr

> 1.6 Procedure

Note the following if you do not use the ETERNUSmgr e-mail notification function.

The "ADMIN_MAIL" parameter may be omitted in ETERNUSmgr in order to disable the e-mail notification function. Note that the e-mail notification function cannot be disabled by omitting the e-mail address at installation, and the setup file must therefore be edited to disable "ADMIN _ MAIL" . See "Chapter 2 Setup" in the "ETERNUSmgr User Guide

-Introduction-" for details of editing the setup file.

If the mail settings are correct, ETERNUSmgr sends an e-mail which includes the following message to the administrator when ETERNUSmgr is started.

"ETERNUSmgr VxxLxx - HTTP Polling engine was started."

*VxxLxx refers to the version/level number.

If no e-mail is sent to the administrator when ETERNUSmgr is started, the mail settings are incorrect. Check whether the contents of the setup file are correct, and if there are any problems in the transmission link.

Refer to "Chapter 3 Startup and Shutdown" in "ETERNUSmgr User Guide -Introduction-" for details of starting ETERNUSmgr.

5

6

Check setup.

If the settings are correct

Enter "y" and press the [Enter] key.

If the settings are incorrect

Enter "n" and press the [Enter] key.

This will return you to Step 1.

To terminate installation

Press the [Ctrl] + [C] keys simultaneously.

Installation will be terminated.

(message displayed)

#WWW Server URL= "http://domain-name/ETERNUSmgr"

#Target Type= "ETERNUS3000"

#Target Address= "0.0.0.0"

#ETERNUSmgr Admin Mail Address= "root@grmacm2"

#Configuration OK?

ETERNUSmgr environment setup is complete.

If environment setup has ended normally, the following message will be displayed.

(message displayed)

Setup of FJSVgrmgr succeed.

End of procedure

Follow the procedure above to copy the necessary files to the specified installation directory. See "Chapter 2 Setup" in the "ETERNUSmgr User Guide -Introduction-" for the necessary setups of the ETERNUSmgr operation.

Target Type

#Polling Server Type

TARGET_TYPE = Target Type specified in Step 1 (Name)

P2U3-0022-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux

14

Copyright 2009 FUJITSU LIMITED

 

Image 14
Contents Page Page Content and Structure PrefaceContents READMEja.TXT Installing ETERNUSmgrETERNUSmgr CD-ROM READMEen.TXTBin/aix/ETERNUSV20L3\30.AIX Bin/sol/ETERNUSV20L30.PKGBin/hp/ETERNUSV20L30.HP Bin/linux/eFJSVgrmgr-V20L30-1.i386.rpmInstalling ETERNUSmgr ETERNUSmgr CD-ROM Installation Outline Supported EnvironmentRequired Hardware/Software For Eternus GR series and ETERNUS3000 model 50, useInstallation Notes For ETERNUS6000, useProcedure Web Directory and Web Directory FilesInstallation by rpm Command Select the type of target device ETERNUSmgr VxxLxx Http Polling engine was started Stxpolld StxchkWww/index.htm StxpollStxpollset.sh Www/fujitsu.gif, www/eternus.gif SetupWww/menu.htm Login as superuser Daemon RegistrationUninstalling ETERNUSmgr Log in as the superuserUninstalling ETERNUSmgr Appendix a How to Set Up the Web Server ExampleReboot apache Procedure Etc/init.d/httpd restart Index STXPOLL.INI STXPOLL1.INI