Installation Outline | Fujitsu P2U3-0022-04ENZ0 specs

Chapter 1 Installing ETERNUSmgr

>1.2 Installation Outline

1.2Installation Outline

The following are two stages in ETERNUSmgr installation.

(1)Installation by rpm command

(2)ETERNUSmgr environment setup

Refer to "1.6 Procedure" (page 11) for the installation procedures.

Check the following before installation.

•The IP address (provided by customer) of the ETERNUS Disk storage system

•The e-mail address of the system administrator (when using the e-mail notification function)

•The directory name on the Web server for the ETERNUSmgr menu file

•The URL for viewing the directory name on the above server using a browser

After installation, refer to the "ETERNUSmgr User Guide -Introduction-" to perform the necessary settings.

For details about monitoring multiple target devices, refer to the "ETERNUSmgr User Guide -Introduction-".

•Supported Operating Systems

•Red Hat Enterprise Linux AS (v. 3 for x86)

•Red Hat Enterprise Linux ES (v. 3 for x86)

•Red Hat Enterprise Linux AS (v. 4 for x86)

•Red Hat Enterprise Linux ES (v. 4 for x86)

•Red Hat Enterprise Linux AS (v. 4 for EM64T)

•Red Hat Enterprise Linux ES (v. 4 for EM64T)

•Red Hat Enterprise Linux 5 (for x86)

•Red Hat Enterprise Linux 5 (for Intel64)

•SUSE Linux Enterprise Server 9 for x86

•SUSE Linux Enterprise Server 9 for EM64T

•SUSE Linux Enterprise Server 10 for x86

•SUSE Linux Enterprise Server 10 for EM64T

ETERNUSmgr is not dependant on the kernel version.

Red Hat Enterprise Linux AS (v. 3 for Itanium), Red Hat Enterprise Linux

AS (v.4 for Itanium), Red Hat Enterprise Linux 5 (for Intel Itanium), SUSE

Linux Enterprise Server 9 for Itanium Processor Family, and SUSE Linux

Enterprise Server 10 for Itanium Processor Family are not supported.

P2U3-0022-04ENZ0 ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux

8	Copyright 2009 FUJITSU LIMITED