Fujitsu FLASH-CAN-100, FMC-16LX FAMILY manual Deliverables

Page 9

Change odd page title here

Chapter 4 Deliverables

4 Deliverables

"FLASH-CAN-100P-M06"/"FLASH-CAN2-100P-M06" will be delivered with:

<the Flash/CAN100 board itself

<two 50pin socket connectors

<power supply connector

<MB90F598 - 128KB flash microcontroller

<11 Jumper

<1 socket adapter cover

<documentation

<Flash programming utility – floppy disc

For software add-ons please contact your local technical support team for the latest software release or Flash-Programming tools.

© Fujitsu Microelectronics Europe GmbH

- 9 -

UG-900001-32

Image 9

Contents FMEMCU-UG-900001-32 FLASH-CAN-100Revision History Schematic of Flash-CAN-100P-M06 misprint External voltageMAX3232CPE No Liability for Consequential Damages Warranty and DisclaimerContents Overview Connectivity problems of the socket adapterAbstract IntroductionFeatures Supported Microcontroller Series Deliverables Configuration of the Evaluation-Board MB90425 Pin MB90440MB90470 MB90540 Pin MB90545 MB90550 MB90583 MB90590 MB90595 Handwire Pin 27 JP10.2 Handwire Pin 28 JP9.2 MB90480 Handwire Pin 88 JP10.2 Handwire Pin 89 JP9.2Handwire Pin 18 JP10.2 Handwire Pin 19 JP9.2 MB90425Only MB90470series Modifications for use with MB90470 / MB90480 seriesSchematic of the modifications for MB90470 / MB90480 Using the Asynchronous Boot-Loader 4,6,7,8 OFF4,5,6,7,8 OFF Power connector ConnectorsAdditionally Vcc and GND Pins are placed on the board JP11 GND/VCC JP11Can Interface X2 UartSilk Plot of the new FLASH-CAN2-100P-M06 Silk-Plot of the boardSchematic of the board Related Products Information in the WWW