Fujitsu FLASH-CAN-100, FMC-16LX FAMILY manual Contents

Page 5

		Change odd page title here
		Contents
Contents
REVISION HISTORY			2
WARRANTY AND DISCLAIMER			4
CONTENTS			5
1	OVERVIEW		6
	1.1	Abstract	6
	1.2	Introduction	6
	1.3	Connectivity problems of the socket adapter	6
2	FEATURES		7
3	SUPPORTED MICROCONTROLLER SERIES		8
4	DELIVERABLES		9
5	CONFIGURATION OF THE EVALUATION-BOARD		10
	5.1	Modifications for use with MB90470 / MB90480 series	12
		5.1.1 Schematic of the modifications for MB90470 / MB90480	13
6	USING THE ASYNCHRONOUS BOOT-LOADER		14
7	CONNECTORS		15
	7.1	Power connector (X1)	15
	7.2	Edge connector (J2, J3, J4, J5)	15
	7.3	GND/VCC (JP11)	15
	7.4	UART (X4)	16
	7.5	CAN Interface (X2, X3)	16
8	SILK-PLOT OF THE BOARD		17
9	SCHEMATIC OF THE BOARD		18
10 RELATED PRODUCTS			19
11 INFORMATION IN THE WWW			20

© Fujitsu Microelectronics Europe GmbH

- 5 -

UG-900001-32

Image 5

Contents FMEMCU-UG-900001-32 FLASH-CAN-100 Revision History Schematic of Flash-CAN-100P-M06 misprint External voltageMAX3232CPE No Liability for Consequential Damages Warranty and DisclaimerContents Overview Connectivity problems of the socket adapterAbstract IntroductionFeatures Supported Microcontroller Series Deliverables MB90470 MB90540 Pin MB90545 MB90550 MB90583 MB90590 MB90595 Configuration of the Evaluation-BoardMB90425 Pin MB90440 Handwire Pin 27 JP10.2 Handwire Pin 28 JP9.2 MB90480 Handwire Pin 88 JP10.2 Handwire Pin 89 JP9.2Handwire Pin 18 JP10.2 Handwire Pin 19 JP9.2 MB90425Only MB90470series Modifications for use with MB90470 / MB90480 seriesSchematic of the modifications for MB90470 / MB90480 4,5,6,7,8 OFF Using the Asynchronous Boot-Loader4,6,7,8 OFF Power connector ConnectorsAdditionally Vcc and GND Pins are placed on the board JP11 GND/VCC JP11Can Interface X2 UartSilk Plot of the new FLASH-CAN2-100P-M06 Silk-Plot of the boardSchematic of the board Related Products Information in the WWW