Fujitsu BS2OSD manual Resource requirements, Extended commands for setting CCS defaults

2.20.11Extended commands for setting CCS defaults

*4 CREATE-FILE / CREATE-FILE-GROUP

*4 The CODED-CHARACTER-SET operand has been extended by the

*4 USER-DEFAULT parameter which is simultaneously also the new

*4 default value.

*4 If this entry is not EDF03IRV, when a file is created the CCS

*4 entry of the ID is taken over into the CCS name of the file. If

*4 EDF03IRV is entered for the ID, the file is assigned the CCS

*4 name *NONE, as previously. New LMS elements are analogously

*4 assigned the CCS name of the library if no other value is

*4 specified.

*4 MODIFY-FILE-ATTRIBUTES / MODIFY-FILE-GROUP-ATTRIBUTES

*4 The CODED-CHARACTER-SET operand was also extended by the *4 parameter USER-DEFAULT.

*4 The default value remains as previously *UNCHANGED.

3 Technical information

3.1Resource requirements

With respect to BS2000/OSD-BC V5.0, using BS2000/OSD-BC V6.0 requires hardly any more CPU performance (below 2%).

Main memory requirements:

You must clarify the main memory required with your sales repre- sentative before ordering the machine. The recommended minimum main memory required for using BS2000/OSD-BC V6.0 depends on the model of the business server.

Increases in main memory requirements:

The additional static requirement compared with BS2000/OSD-BC V5.0 is 3 - 5 MB. The additional dynamic requirement is approxi- mately 30 - 50 KB per task, depending on the size of the user space allocated.

Before changing versions, you should clarify any additional in- stallation-related resource requirements with your regional ser- vice

Disk storage space:

You will find the disk storage space required by the SOLIS2 de- livery for BS2000/OSD-BC V6.0 in the SOLIS2 delivery letter. In addition, you must also plan in the space required for the system files (PAGING area, TSOSCAT, CONSLOGs, SERSLOGs, etc.).

Page 30