Fujitsu fi-4110EOX2 manual Troubleshooting Checklist

Page 71

5.2 Troubleshooting Checklist

Symptom

Check This Item

Remedy

 

 

 

Vertical line appear in

Is the inside of the feed sec-

Clean the feed section following the instruc-

the printed image.

tion dirty?

tions in "DAILY CARE" (page. 64).

 

 

 

The printed image

Is the document loaded cor-

Load the document correctly.

shifts or is distorted.

rectly?

 

 

 

 

The image is printed

Is the "B&W scanning, is

Adjust "Brightness" at [Scanning] - [Option...]

white or dark.

[Option...] - "Brightness" in

in the "Scan and Save Settings" screen.

 

the [Scanning] tab set

 

 

extremely Light or Dark?

 

 

 

 

Double-feed (Note) fre-

Is the Pad ASSY dirty?

Clean the pad following the instructions in

quently occurs.

 

"Cleaning the ADF" (page. 67).

 

 

 

 

Is the Pad ASSY worn?

Clean the Pad ASSY following the instructions

 

 

in "Replacing the Pad ASSY" (page. 58).

 

 

 

 

Is the document stack

Reduce the number of sheets in the document

 

thicker than 4 mm?

sheet to 4 mm thickness or less.

 

 

 

Paper is not fed (stops

Is the Pick roller dirty?

Clean the Pick roller following the instructions

midway).

 

in "6.3 Cleaning the ADF" (page. 67).

 

 

 

 

Is the Pick roller worn?

Clean the Pick roller following the instructions

 

 

in "Replacing the Pick Roller" (page. 61).

 

 

 

 

Is there debris on the docu-

Remove any debris from the document feed

 

ment feed path?

path. (Refer to "5.1 Clearing Document Jams"

 

 

(page. 52)).

 

 

 

The scanner is not rec-

Was the scanner con-

On the [Start] menu, select [Control panel] -

ognized even if Scan-

nected to your computer

[System] - [Hardware] - [Device Manager].

Snap! Driver is

before ScanSnap! Driver

Delete the "Other Device" selection in the

installed.

was installed?

[Device Manager] and restart your computer.

 

Is the scanner registered as

 

 

"Other device" in the

 

 

"Device Manager"?

 

 

 

 

The size of the

Is the B&W document being

Set [Color mode:] on the [Scanning] tab in the

scanned image file is

scanned in the color mode?

"Scan and Save Settings" screen to "B&W".

the same as that for a

 

 

color document even

 

 

though you are scan-

 

 

ning a B&W document.

 

 

 

 

 

The back side of the

Is the "Allow automatic

Mark the "Reduce the noise of back side

document appears in

noise reduction." checkbox

image (Available only in color)" checkbox.

the scanned image

unmarked at [Option...] on

 

when scanning a two-

the [Scanning] tab in the

 

sided document (noise

"Scan and Save Settings"

 

of back side image).

screen.

 

 

 

 

Note) "Double-feed" is a phenomenon where two or more sheets are fed into the scanner in a single operation.

5

TROUBLESHOOTING

ScanSnap! fi-4110EOX2 Operator's Guide

55

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Fi-4110EOX2 Operator’s Guide Page Business cards easily filed Effortless scanningSmall desktop footprint Contents Uninstalling ScanSnap Repairs Canadian DOC Regulations Regulatory InformationFCC declaration International Energy Star Program Use in High-safety ApplicationsBescheimigung des Herstellers / Importeurs Manufacturer About the use of mercuryTrademarks How Trademarks Are Indicated In This ManualPreface Symbols Used In This Manual Screen Examples In This Manual About MaintenanceDo not touch the AC cable with wet hands Safety PrecautionsUse only specified AC cables and connector cables Wipe any dust from the power plugDo not put liquids inside the scanner Do not use the scanner if you smell strange odorTurn the scanner OFF if it is damaged Do not block the ventilation ports Do not install the scanner on unstable surfacesFirmly insert the power plug Do not touch the inside of the scanner unless necessaryDo not use aerosol sprays near the scanner Avoid any contact when scanner is in useDo not install the scanner in the direct sunlight Protect the scanner from static electricityBefore YOU Start Using Your Scanner Checking the Contents of the Scanner Package Rear Side Names and Functions of PartsFront Side Connecting ScanSnap Operating system Installing ScanSnapBefore Installing ScanSnap Personal computerOperation Installing Adobe AcrobatConnecting ScanSnap Installing Supplied Programs ScanSnap! Driver and CardMinder Connecting ScanSnap ⇒ The License Agreement screen is displayed Custom TypicalCompact InstallShield Wizard Completescreen, click Finish button Hint Connecting the AC Adapter Connecting Your Computer to ScanSnapConnect the USB cable by the following procedure Connecting the USB CableWhen the OS is Windows XP When the OS is WindowsWhen the OS is Windows Me Hint Basic Scanner Operations Basic Scanner Operations Flow of OperationsPress Scanning Different Document Types WeightPage Fan the documents Loading DocumentsWhen loading the document so that one side is scanned When loading the document so that both sides are scannedAdjust the Side guides to the document width Scanning Documents When scanning two sides of the documentWhen scanning one side of the document Scanning Documents Changing Scan Settings Application Application tabAdd or Remove button Basic Scanner Operations Hint Folder path to save image Save tabFilename format... button Scanning quality Scanning tabBrightness Color modeOption... button Allow automatic image rotation File option tabAllow automatic noise reduction Allow automatic blank page removalOption button Paper size tabSelecting the file option Paper size Custom... button Compression rate Compression tabAbout the size of image data Scanning business cards Scanning Business CardsSelect CardMinder at Application on the Application tab PreparationsCardMinder User’s Guide Scanning procedureThis is for Windows Me, Windows 2000, and Windows XP Start Explorer Select Thumbnails from the View toolbar Uninstalling ScanSnap Uninstalling ScanSnap Click the Remove button Troubleshooting Clearing Document Jams Troubleshooting Symptom Check This Item Remedy Troubleshooting ChecklistTroubleshooting Checklist Fire/Electric Shock Part Nos. and Replacement Cycle of ConsumablesReplacing Consumables Replacing Consumables Remove the Pad Assy Replacing the Pad AssyPush in center Click the Reset button in the Check consumable status screen Remove the ADF paper chute Remove the Pick roller Replacing the Pick RollerPush in center Troubleshooting Daily Care Cleaning Materials Parts No Remarks Cleaning MaterialsCleaning the Scanner Exterior and ADF paper chute Clean the ADF with a cloth moistened with cleaner F1 Cleaning the ADFPage Paper guide surface white part Clean lightly Appendixa Index Page Repairs Page ScanSnap! fi-4110EOX2 Operator’s Guide

fi-4110EOX2 specifications

The Fujitsu fi-4110EOX2 is a high-performance document scanner that stands out in the competitive landscape of office imaging solutions. Designed for small to medium-sized businesses, this scanner strikes an exceptional balance between speed, quality, and versatility, making it an ideal choice for various document management needs.

One of the key features of the fi-4110EOX2 is its impressive scanning speed. Capable of scanning up to 30 pages per minute in duplex mode, it allows users to digitize large volumes of documents quickly and efficiently. This efficiency is further enhanced by the scanner’s ability to automatically detect the size and orientation of the document, ensuring optimal results with minimal user intervention.

The Fujitsu fi-4110EOX2 leverages advanced imaging technologies that improve the overall quality of scans. With capabilities such as Automatic Document Feeder (ADF) and robust image enhancement features, including color dropout, blank page removal, and automatic brightness adjustment, it produces clear, high-resolution images whether dealing with black and white or color documents. This makes it especially useful for archiving, legal documentation, and record-keeping.

Another significant aspect of the fi-4110EOX2 is its versatility in handling various document types and sizes. The scanner accommodates everything from standard A4 sheets to embossed cards and long documents, providing operational flexibility across multiple applications. Its 50-sheet ADF enhances productivity by allowing users to load multiple documents for continuous scanning without interruption.

The user-friendly interface of the Fujitsu fi-4110EOX2 adds to its appeal. With simple connectivity options via USB 2.0, as well as compatibility with various operating systems, users can quickly integrate it into their existing workflows. Furthermore, the scanner comes equipped with software solutions such as ScanSnap, which facilitates easy document management and organization.

In terms of build quality, the fi-4110EOX2 showcases Fujitsu's commitment to durability and reliability. It is designed to withstand the demands of a busy office environment, ensuring users have a scanner they can depend on for heavy usage.

In summary, the Fujitsu fi-4110EOX2 combines speed, quality, and versatility in a compact design, making it a valuable asset for any organization looking to enhance its document scanning capabilities. With its advanced imaging technology and user-friendly features, it paves the way for efficient and modern document management solutions.
Top Page Image Contents