Fujitsu CELCIUS M/V/R Connecting external devices to the parallel or serial port, Port settings

Page 23

Preparing for use

Connecting external devices to the parallel or serial port

External devices can be connected to the parallel or serial port (e.g. a printer or a modem).

Connect the data cable to the external device.

Depending on the device, connect the data cable to the parallel port or the serial port.

For an exact description of how to connect external devices to the corresponding port, please see the external device documentation.

Port settings

You can change the port settings (e.g. address, interrupt) in the BIOS Setup.

i

Device drivers

The devices connected to the parallel or serial port require drivers. Your operating system

i already includes many drivers. If the required drive is missing, install it. Current drivers are usually available on the Internet or will be supplied on a data carrier.

Connecting external devices to the USB ports

You can connect a wide range of external devices to the USB ports (e.g. printer, scanner, modem or keyboard).

i

USB devices are hot-pluggable. This means you can connect and disconnect devices

while your operating system is running.

Additional information can be found in the documentation for the USB devices.

Connect the data cable to the external device.

Connect the data cable to a USB port .

Device drivers

The devices you connect to the USB ports usually require no driver of their own, as the

i required software is already included in the operating system. However, if the USB device requires its own software, please install it from the data carrier provided with the USB device.

To ensure USB 2.0, only a 3 m long cable may be used from the front USB port to the USB peripheral device.

A26361-K990-Z120-1-7619, Edition 6

15

Image 23
Contents Celsius M / V / R Are there Page Published by Operating Manual Celsius M / V / RPage Contents Contents Documentation or Drivers & Utilities DVD Your CelsiusNotational conventions Transporting the device Safety notesCleaning the device Important notesCE mark for devices without radio component Energy saving, disposal and recyclingCE mark FCC Class B Compliance Statement Important notes External devices Steps for initial setupPreparing for use Unpacking and checking the deliveryScrewing on the base foot Celsius V, Celsius R6xx Setting up the deviceUnscrewing the base foot Celsius V, Celsius R6xx Connecting monitorConnect the monitor, mouse and keyboard Keyboard, connecting Connecting the mouseConnecting the device to the mains voltage Switching on monitor and device Switching on for the first time installing the softwareDisconnecting cables External devices, connectingInstalling the software Connecting cablesPorts provided by the device LANDevice drivers Connecting external devices to the parallel or serial portConnecting external devices to the USB ports Port settingsConnecting external devices to the FireWire port Operation Switching the device onSwitching off the device Power-on indicator Indicators provided by the deviceHard disk indicator Important keys and key combinations KeyboardMenu key Warm bootEnter key Start keyProtect the floppy disk against being overwritten or erased Working with floppy disksTo insert a floppy disk To remove a floppy diskAnti-theft protection Settings in Bios SetupProperty and data protection Anti-theft protection and lead-sealingMore information on SystemLock Bios setup security functionsAccess authorisation via SmartCard optional Access protection with SystemLock optionalSmartCard reader operating SystemLock permissionsTroubleshooting and tips Cause Troubleshooting TroubleshootingDevice cannot be switched off with the ON/OFF switch Screen, stays blank Set the correct values for the connected monitor, as No mouse pointer displayed on the screenTime and/or date is not correct Installing new softwareError messages on the screen Floppy disk cannot be read or writtenTips Hard disk contents, restoringInformation about boards System upgradesVariant a version with knurled screws Opening the casingVariant B version with a locking lever Closing the casing System upgrades Opening front panel Closing front panel Removing the side fan Installing the side fan Securing front fan on fan bracket Installing front fan Celsius MInstalling the front fan Removing front fan Celsius M Removing ventilation duct Celsius Installing ventilation duct Celsius Removing ventilation duct Celsius M System upgrades Installing ventilation duct Celsius M System upgrades Removing the ventilation duct Celsius R5xx Installing the ventilation duct Celsius R5xx Removing the cross-piece Installing the cross-piece Removing cover of power supply Celsius M Installing cover of power supply Celsius M Installing a board Installing and removing a boardSystem upgrades Removing a board Push the slot cover into the slot Removing slot adapter Low-profile boardsMounting slot adapter Serial ATA drives and Scsi drives Installing and removing drivesSata SCSI/SAS Removing an accessible drive System upgrades Installing an accessible drive Removing the floppy disk drive Floppy disk drive removing and installingInstalling the floppy disk drive Installing a hard disk drive Installing and removing the hard disk driveRemoving a hard disk drive System upgrades Screwing SmartCard reader onto carrier Installing/removing a SmartCard reader optionalSmartCard reader, installing SmartCard reader, installingSystem upgrades Removing a SmartCard reader System upgrades Initial installation of a Wlan module Installing and removing a Wlan module optionalInstalling Wlan module Installing Wlan module System upgrades Removing Wlan module Processor, replacing Extensions to the mainboardMain memory, upgrading Battery lithium battery changing System upgrades Electrical data Technical dataDimensions WeightTechnical data Cable IndexIndex Scsi USB

CELCIUS M/V/R specifications

Fujitsu has long been recognized for its innovative contributions to the computing and technology landscape, and the CELCIUS M/V/R series is a remarkable testament to this legacy. This advanced line of servers stands out for its efficiency, reliability, and versatility, making it an ideal choice for businesses seeking to enhance their IT infrastructure.

One of the defining features of the CELCIUS M/V/R series is its modularity. These servers are designed to adapt to various workloads, allowing organizations to customize their configurations according to specific needs. This modular approach not only optimizes resource utilization but also enables seamless scalability, ensuring that businesses can grow without the constraints of outdated hardware.

The series supports a range of advanced technologies, including Fujitsu's proprietary innovations. Notably, the CELCIUS M/V/R incorporates the latest Intel Xeon processors, delivering powerful performance for demanding applications. These processors enhance processing speeds and improve energy efficiency, providing a strong foundation for computational tasks in data centers.

In terms of storage capabilities, the CELCIUS series excels with its support for both traditional HDDs and cutting-edge SSDs. This versatility ensures that businesses can experience faster data retrieval times while accommodating large data volumes. Furthermore, the server's advanced RAID (Redundant Array of Independent Disks) configurations enhance data redundancy and reliability, protecting against potential data loss.

Another key aspect of the CELCIUS M/V/R is its commitment to energy efficiency. Fujitsu has integrated smart power management features that enable dynamic power allocation based on workload demands. This not only reduces operating costs but also minimizes the environmental impact, aligning with the growing demand for sustainable technology solutions.

Security is paramount in today’s digital landscape, and the CELCIUS series incorporates robust security features. Advanced encryption, secure boot technology, and comprehensive monitoring ensure that sensitive data is protected from unauthorized access, providing peace of mind for organizations handling critical information.

Moreover, the CELCIUS M/V/R series is equipped with remote management capabilities, allowing IT administrators to monitor and manage server performance from anywhere. This flexibility enhances operational efficiency, enabling quick response to any issues that may arise.

Overall, the Fujitsu CELCIUS M/V/R series represents a cutting-edge solution for enterprises looking to bolster their IT infrastructure. With its modular design, advanced processing capabilities, and strong focus on energy efficiency and security, it is a compelling choice for businesses aiming to stay competitive in an increasingly digital world. Whether for small businesses or large enterprises, the CELCIUS series is engineered to meet diverse computing needs with reliability and performance.