Fujitsu CELCIUS M/V/R manual Installing front fan Celsius M, Securing front fan on fan bracket

Page 48

System upgrades

Installing front fan (CELSIUS M)

You must install a front fan when converting the hard disks to SCSI hard disks.

Securing front fan on fan bracket

1

►Lay the fan on the fan bracket in the direction of the arrow (1).

When doing so, ensure the proper rotating and air-flow direction.

►Press the fan firmly into the fan bracket until it is felt to engage.

Installing the front fan

►Open the casing (see "Opening the casing").

►Open the front panel (see "Opening front panel").

1

2

►Connect the fan cable.

►Insert the fan into the casing in the direction of the arrow (1) so that the lower edge of the fan is flush with the bottom of the device.

Make sure that the power supply cable is not pinched when doing so.

►Slightly pull back the green expansion rivet (2) until the tip of the expansion rivet is no longer spread.

40	A26361-K990-Z120-1-7619, Edition 6

Image 48

Contents Celsius M / V / R Are there Page Published by Celsius M / V / R Operating ManualPage Contents Contents Your Celsius Documentation or Drivers & Utilities DVDNotational conventions Safety notes Cleaning the deviceImportant notes Transporting the deviceEnergy saving, disposal and recycling CE markCE mark for devices without radio component FCC Class B Compliance Statement Important notes Steps for initial setup Preparing for useUnpacking and checking the delivery External devicesSetting up the device Screwing on the base foot Celsius V, Celsius R6xxConnecting monitor Connect the monitor, mouse and keyboardUnscrewing the base foot Celsius V, Celsius R6xx Connecting the mouse Keyboard, connectingConnecting the device to the mains voltage Switching on for the first time installing the software Switching on monitor and deviceExternal devices, connecting Installing the softwareConnecting cables Disconnecting cablesLAN Ports provided by the deviceConnecting external devices to the parallel or serial port Connecting external devices to the USB portsPort settings Device driversConnecting external devices to the FireWire port Switching the device on Switching off the deviceOperation Indicators provided by the device Hard disk indicatorPower-on indicator Keyboard Important keys and key combinationsWarm boot Enter keyStart key Menu keyWorking with floppy disks To insert a floppy diskTo remove a floppy disk Protect the floppy disk against being overwritten or erasedSettings in Bios Setup Property and data protectionAnti-theft protection and lead-sealing Anti-theft protectionBios setup security functions Access authorisation via SmartCard optionalAccess protection with SystemLock optional More information on SystemLockSystemLock permissions SmartCard reader operatingTroubleshooting and tips Troubleshooting Device cannot be switched off with the ON/OFF switchCause Troubleshooting Screen, stays blank No mouse pointer displayed on the screen Set the correct values for the connected monitor, asInstalling new software Error messages on the screenFloppy disk cannot be read or written Time and/or date is not correctHard disk contents, restoring TipsSystem upgrades Information about boardsOpening the casing Variant a version with knurled screwsVariant B version with a locking lever Closing the casing System upgrades Opening front panel Closing front panel Removing the side fan Installing the side fan Installing front fan Celsius M Installing the front fanSecuring front fan on fan bracket Removing front fan Celsius M Removing ventilation duct Celsius Installing ventilation duct Celsius Removing ventilation duct Celsius M System upgrades Installing ventilation duct Celsius M System upgrades Removing the ventilation duct Celsius R5xx Installing the ventilation duct Celsius R5xx Removing the cross-piece Installing the cross-piece Removing cover of power supply Celsius M Installing cover of power supply Celsius M Installing and removing a board Installing a boardSystem upgrades Removing a board Push the slot cover into the slot Low-profile boards Mounting slot adapterRemoving slot adapter Installing and removing drives Serial ATA drives and Scsi drivesSata SCSI/SAS Removing an accessible drive System upgrades Installing an accessible drive Floppy disk drive removing and installing Installing the floppy disk driveRemoving the floppy disk drive Installing and removing the hard disk drive Installing a hard disk driveRemoving a hard disk drive System upgrades Installing/removing a SmartCard reader optional SmartCard reader, installingSmartCard reader, installing Screwing SmartCard reader onto carrierSystem upgrades Removing a SmartCard reader System upgrades Installing and removing a Wlan module optional Installing Wlan moduleInitial installation of a Wlan module Installing Wlan module System upgrades Removing Wlan module Extensions to the mainboard Main memory, upgradingProcessor, replacing Battery lithium battery changing System upgrades Technical data DimensionsWeight Electrical dataTechnical data Index CableIndex Scsi USB