System upgrades
Installing and removing the hard disk drive
Installing a hard disk drive
►Open the casing (see "Opening the casing").
►Take the new hard disk drive out of its packaging.
►Only for SCSI drives: Make the required settings on the drive.
a |
b |
►Secure the EasyChange rails on the side of the hard disk by inserting the pins (a) of the EasyChange rail in the corresponding holes (b) of the hard disk.
1 |
2 |
1 |
►Press the EasyChange rails in the direction of the arrows (1).
►Push the hard disk drive into the casing (2) until the EasyChange rails engage.
65 |