Question: The scanned image always comes out to be too dark.
Answer: a) Use your application to modify the Gamma setting to 2.2 and 1.8 for your printer and monitor respectively.
b)Use Brightness setting from the TWAIN user interface to get a brighter image.
Question: The Scanner works well otherwise, but for the line art, the lines of which seem much thicker than those of the original.
Answer: Use the Brightness or Threshold setting to adjust the line art image.
4.2Paper Jam in the ADF
In the event of paper jam, please follow the procedures below.
i). Press the button at the front left of the Scanner as shown in Figure
ii). Open the ADF cover to the full open position, arrow B.
iii). Pull the paper out of the ADF unit carefully, as shown in Figure 4.2, arrow A.
B
A