Fujitsu 15C user manual Cleaning the Glass The procedures, Cleaning Area

Page 17

3.2Cleaning the Glass The procedures:

i). Soak a cotton swab with some isoprophy alcohol (95%).

ii). Open the ADF unit and document cover as shown in Figure 6-2. Wipe the glass of flatbed area and ADF area by moving the swab from side to side.

iii). Close the ADF unit and document cover. Your Scanner is now ready for use.

Figure 3-2 The Cleaning Area

3-3

Image 17
Contents Scanpartner 15C Image Scanner Table of Contents Introduction Scanner packing Precautions Installation and ConnectionsShipping Bracket Removing the Shipping Bracket refer to figures 2-1Removing the Shipping Bracket Scsi Interface Device ID Refitting the Shipping BracketAdjusting the Scsi ID setting ADF Paper Chute Figure Setting the ADF Paper ChuteADF Output Tray Figure Install the ADF Output Paper TrayPlace Document on the Scanner Document LoadingUse ADF to Load Multiple Documents ADF ScanningIii. Scsi Termination Connecting the Cable Turning the Power OffIi. Turning the Power On Scanpartner 15C Scanner Cable Connection Cleaning the ADF MaintenanceOpening the ADF unit and Document Cover Cleaning Area Cleaning the Glass The proceduresQuestion and Answer TroubleshootingPage ADF Paper Jam Opening the ADF Paper Jam in the ADFADF Paper Jam Removing the Paper Specifications Scanpartner 15C Specifications