Fujitsu 15C user manual Specifications

Page 22

5. SPECIFICATIONS

All specifications are subject to change without notice.

The following can not be properly fed by ADF:

Paper with clip or staple attached;

Paper with ink not totally dry;

Paper with inconsistent thickness, such as envelopes;

Paper with wrinkles, curls, folds or tears;

Tracing paper;

Coated paper;

Carbonless paper;

Paper narrower than 3.5" or wider than 8.5";

Items other than papers, such as cloth, metal or OHP film;

Notched paper;

Paper with an odd (non-rectangular) shape;

Very thin paper.

Please use the flatbed to scan documents that cannot be fed by the ADF.

5-1

Image 22
Contents Scanpartner 15C Image Scanner Table of Contents Introduction Scanner packing Shipping Bracket Installation and ConnectionsPrecautions Removing the Shipping Bracket refer to figures 2-1Removing the Shipping Bracket Refitting the Shipping Bracket Scsi Interface Device IDAdjusting the Scsi ID setting Setting the ADF Paper Chute ADF Paper Chute FigureInstall the ADF Output Paper Tray ADF Output Tray FigureDocument Loading Place Document on the ScannerADF Scanning Use ADF to Load Multiple DocumentsIi. Turning the Power On Connecting the Cable Turning the Power OffIii. Scsi Termination Scanpartner 15C Scanner Cable Connection Maintenance Cleaning the ADFOpening the ADF unit and Document Cover Cleaning the Glass The procedures Cleaning AreaTroubleshooting Question and AnswerPage Paper Jam in the ADF ADF Paper Jam Opening the ADFADF Paper Jam Removing the Paper Specifications Scanpartner 15C Specifications