Chapter 2. Using the Multi-Burner drive
This section provides information on how to handle, load, and care for DVDs and CDs and how to care for your
Before you begin
For best results, review the following guidelines before using the drive:
vDo not move your ThinkPad computer while formatting or writing a disc as this might cause data errors. Also, minimize typing while formatting or writing to a disc, as this might also cause data errors.
vKeep the ThinkPad computer on a flat surface when writing to a disc.
vMake sure the ThinkPad computer is plugged into an ac outlet when using the drive. The disc might be damaged if the battery runs out while writing to a disc.
vTurn screensavers off. Using a screensaver might interrupt the formatting and writing process.
vDo not put your ThinkPad computer into hibernation or suspend mode while writing to a disc.
Note: The read and write results of the drive depend upon the quality and characteristics of the DVD or CD media used.
Handling and caring for a disc
Carefully handle and clean discs, especially writable media types such as
vAlways store discs in their original packaging.
vAlways store discs out of direct sunlight.
vAlways store discs away from direct heat sources.
vRemove discs from the computer when not in use.
vCheck discs for cracks BEFORE each use. IMPORTANT: Do not use discs that are cracked.
vDo not force discs into the computer or packaging.
vDo not bend or flex discs.
vDo not use commercial cleaners to clean discs.
vDo not write on the surface of discs.
vHandle discs by the edges or the center hole.
vDo not touch the surface of discs.
vTo remove dust or fingerprints, wipe discs from the center to the edge with a soft,
Attention: Wiping a disc using a circular motion can cause data loss.
© Copyright IBM Corp. 2003 | 7 |