IBM 22P6979 manual Mounting the drive in the bay

Page 16

one pair of pins corresponding to the setting you chose in Step 3.

vIf you are configuring the drive as master, set the jumper to the master device setting. (This is how the drive is set when it is shipped.) If there is a second device on the IDE port, check that the device is configured as slave.

v If you are configuring the drive as slave, set the jumper to the slave device setting. Check that the other device on the IDE port is configured as master (or master-with-slave-present).

vIf you are configuring the drive as cable-select, set the jumper to the cable-select device setting. If there is another device on the IDE port, check that the

device is also configured for cable-select.

Step 5. Mounting the drive in the bay

Attention: Be sure to use the mounting screws in the option package when you are driving screws directly into the drive. Using screws that are too long might damage the drive.

You can mount the CD-RW drive in the computer either horizontally or vertically. If you mount the drive vertically, you must secure any CDs you place into the drive before you close the drive tray, or the CD-RW drive will not be able to read the CD properly. For further instructions on securing your CDs in a vertically mounted drive, see “Loading a CD” on page 10.

1.Slide the drive into the bay. Your computer might have specific required procedures for installing storage devices. Refer to the documentation that came with your computer for further instructions.

2.Align the drive-bay screw holes with the threaded holes in the drive housing or mounting bracket. Be sure to use the mounting screws provided with this drive. Using the wrong size screws might damage the drive. Thread the screws in loosely to check their position. Usually two screws are used on each side.

3.Check to ensure that the alignment is correct, and then tighten the screws to secure the drive. Do not overtighten.

640X/12X/40X Max CD-RW Drive: User’s Guide

Image 16
Contents User’s Guide Page User’s Guide Page Safety Read first Iv 40X/12X/40X Max CD-RW Drive User’s Guide Contents Vi 40X/12X/40X Max CD-RW Drive User’s Guide Installation and user’s guide About this bookRegistering your option AppendixesViii 40X/12X/40X Max CD-RW Drive User’s Guide Introduction Installation and user’s guideProduct description Before you begin Software descriptionSystem requirements Handling Instructions Product viewsFront view of the drive Back view of the drive40X/12X/40X Max CD-RW Drive User’s Guide Installing the Drive Setting the configuration jumperOpening the computer Unpacking the driveMounting the drive in the bay Updating your computer configuration Completing the hardware installationAttaching the cables to the drive Installing the CD-RW drive software Using CD-R and CD-RW discsUsing the drive Handling and caring for a CDCaring for the CD-RW drive Loading a CDUsing Windows XP native recording with your CD-RW drive Ejecting a CD manuallyOpen My Computer Using IBM Drive Letter Access DLAClick Make Compatible Using the RecordNow software Using StorageGuardIBM RecordNow 14 40X/12X/40X Max CD-RW Drive User’s Guide Physical specifications Appendix A. Product specificationsPower requirements Drive-performance specifications Environmental requirementsWrite/Read speeds Media Speed CompatibilityFormat Copy capability Create Capability CD-ROM XA Mode 2 Form 1 and Mode 2 Form 2 or CD-ROM Extended Appendix B. Problem solving You cannot format a CD-RW discYou cannot create a multi-session disc You cannot successfully write to a CD-R or CD-RW discYou cannot eject a CD Select Make a Data DiscClick Start → Settings → Control Panel CD cannot be readThere is no sound from the CD Click Start → Control Panel Click Switch to classic view Click the Advanced Settings tabClick the Device Manager tab Click Device Manager buttonEnabling DMA for Windows 2000 Professional Click Device ManagerAppendix D. Product warranty and support information Warranty informationWarranty period Service and SupportIBM Warranty for Machines IBM Statement of Limited Warranty Z125-4753-06 8/2000Part 1 General Terms Extent of Warranty Items Not Covered by WarrantyWarranty Service KindLimitation of Liability Part 2 Country-unique Terms CAMBODIA, LAOS, and Vietnam Hong Kong and MacauIndia JapanPEOPLE’S Republic of China PRC NEW ZealandEUROPE, Middle EAST, Africa Emea Following Terms Apply to the Country Specified Austria and GermanyEgypt FranceIreland ItalySouth AFRICA, NAMIBIA, BOTSWANA, Lesotho and Swaziland United KingdomAppendix E. Notices Trademarks Industry Canada Class a emission compliance statementAvis de conformite a la reglementation d’Industrie Canada Deutsche EMV-Direktive electromagnetische VerträglichkeitUnion Européenne Directive Conformité électromagnétique Europen Union EMC directiveUnion Europea Normativa EMC Unione Europea Directiva EMC Conformidad électromagnética Appendix E. Notices 40 40X/12X/40X Max CD-RW Drive User’s Guide Page Part Number 22P6979 1P P/N 22P6979