IBM L180p manual OSD Icon Description Sub-menus

ENGLISH

	OSD Icon		Description	Sub-menu(s)					Controls and Adjustments
									Analog	Digital
			Use this button to make the analog or					Analog
			digital connector active. This feature
			is used when two computers are
Image		Input Signal	connected to the monitor. The default					Analog
			setting is analog.
Properties
								Digital
			Display the detailed information of
			mode, model name, serial number
Options		Information	and microcode.
			The language chosen affects only the		• English
			language of the OSD.		• Franç ais
			Select one of the six language to use		• Italiano
		Menu Language	for the OSD.		• Deutsch
			It has no effect on any software		• Españ ol
					•
			running on the computer.
			Changes the position of the OSD on		• Default				Move at center on the screen.
			the screen.
		Menu Position			Custom
					•		H
					•		V
					•		Save
			Reset should return all available		• Cancel
			functions (apart from language which		• Reset
		Factory Default	should not change unless adjusted
			via the Language menu) to their
			factory presets.
			Change button repeat rate and menu	Button					Adjusts respondence speed
			time-out setting.	repeat rate					of button.
				•		Off
		Accessibility		•		Default
				•		Slow
				Menu time out					Adjusts the length of time for
									which the menu will stay on
									the screen before it
									disappears.
			Exits from current OSD menu.
Exit

21