Cisco Systems IE301024TC manual SD Flash Memory Card, PoE LED, Dual-Purpose Port LEDs, Color

Chapter 1 Product Overview

Cable Side

PoE LED

Table 1-9 PoE LED

Color

Off

Green

Amber

Meaning

PoE is not enabled.

PoE is enabled. Ports are functioning correctly.

PoE is enabled, but an error is present.

Dual-Purpose Port LEDs

The dual-purpose port LEDs identify the connection as either a copper-based connector or an SFP module. The ports can autonegotiate, or you can manually configure each dual-purpose port as either 10/100/1000 with copper connectors or as an SFP-module port, but not as both types at the same time. See Table 1-8for LED descriptions.

SD Flash Memory Card LED

Table 1-10	SD Flash Memory Card LED
Color		System Status
Off / blinking green		SD flash memory card transfer in progress.
Blinking amber		SD flash memory card is not present (slow blinking).
		Unsupported SD flash memory card is detected (fast blinking).
Amber		Error accessing the SD flash memory card.
		Cisco IOS boot image cannot be found.
Green		SD flash memory card is functioning.

SD Flash Memory Card

The switch ships with the Secure Digital (SD) flash memory card installed. See Figure 1-1and Figure 1-2. The switch stores the Cisco IOS software images and the switch configuration on the card. You should not remove the card unless you want to use it in a replacement switch. You then do not have to reconfigure the new switch. See the “Replacing the SD Flash Memory Card” section on page 2-23for information.

Cisco IE 3010 Switch Hardware Installation Guide

78-19581-02 1-11