Fujitsu Siemens Computers TX120 manual Removing the dummy cover from the top cover

Page 30

Installing an HDD extension box	Accessible drives

Figure 12: Removing the dummy cover from the top cover

ÊPress the dummy cover outwards from the top cover in the direction of the arrow.

VCAUTION!

Keep the dummy cover in a safe place. If the HDD extension box is removed again and not replaced with a new one, then the dummy cover must be reinstalled due to cooling, the applicable EMC regula- tions (regulations on electromagnetic compatibility) and fire protection.

ÊClose the server (see section “Assembling the server” on page 44).

ÊIf necessary, place the server in the vertical position as described in the operating manual

ÊConnect the system to the line voltage and switch it on.

30

Options Guide

TX120

Image 30

Contents Primergy TX120 Server Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Contents Introduction Concept and target groupsDocumentation overview Documentation overviewIntroduction Further sources of informationExpansions and conversions Notational conventions Page Procedure Page Safety Safety Before starting up Installation and operationSafety Batteries Safety Working with CDs/DVDs and CD/DVD drives Laser informationNever remove parts of the CD/DVD drive casing Safety Modules with electrostatic-sensitive components ESD labelPreparation Opening the serverRemoving the crosspiece Removing the crosspiece PreparationDisconnecting the cables Removing the drive cageRemoving the drive cage Preparation Removing the drive cageMain memory Equipping rulesEquipping rules ModeExpanding/replacing the main memory Main memoryRemoving a memory module Installing a memory module Expanding/replacing the main memoryAccessible drives Installing an HDD extension boxInstalling an HDD extension box Fixing the rails on the HDD extension boxAccessible drives Installing an HDD extension boxRemoving the dummy cover from the top cover Installing a backup drive Installing a backup drive Fixing the rails on the backup driveUnfasten the cable clamp Connecting the USB and power cables to the backup drive Close the server see section Assembling the server on Page Expansion cards in the PCI slots PCI slot overviewInstalling an expansion card Installing an expansion cardInstalling an expansion card Closing the lock and fastening the slot cover Installing the drive cage CompletionInstalling the drive cage Connecting the cablesInstalling the crosspiece CompletionAssembling the server Assembling the serverAppendix CablingCabling AppendixAppendix CablingPower cable SAS backplane, backup drive and CD/DVD drive Cabling fan, control panel front panel TX120 Data and signal cable SAS backplane and CD/DVD drive A3C40083128 A3C40083120 A3C40085241 A3C40083117 A3C40083119 Abbreviations Abbreviations IRMC LCD ROM SSU Index Server